Manual AEG BSS 4816 (page 42 of 74) (English, German, Dutch, French, Italian, Polish, Spanish)

546331

Zoom out

Zoom in

1/74

English

For optimum installation of the loudspeakers, please fol-

low the instructions below:

Connection

CAUTION:

• Switch off the subwoofer before connecting the speak-

ers or modifying the connection.

• Make sure that the uninsulated speaker wires do not

touch/cross. Risk of short circuiting!

• Do not operate the unit at maximum volume. This may

lead to damage.

• Never connect the speakers to the mains!

• Never touch the speaker membranes with your hands

or with objects. Doing so may damage the membranes.

• Do not overload the speaker boxes.

NOTE:

Please ensure

• that the plug-in connectors are rmly in place. Poor

connections can result in interference.

• that exposed wires do not touch or cross each other.

Danger of short-circuiting!

1 Antenna connection

Plug the supplied FM wire antenna onto the connection.

2 5.1CH INPUT (5.1 connections)

Used for connecting an external sound source to a 5.1

output (e.g. DVD player).

NOTE:

The device has an analogue 5.1 connection for an AC3

or DTS decoder.

3 2CH/AUX (2.1 connections)

For connection of an external sound source with normal

stereo recording (e.g. hi video recorder).

4 SPEAKER OUTPUT

• Outputs on the right and left for connection of the

front loudspeakers (FR/FL).

• Outputs for connection of the surround speaker

boxes right and left (RR/RL).

• Output for connection of the centre loudspeaker

(CEN).

1. Remove around 1.5 cm of the cable insulation.

2. Twist the end of the cable.

3. Open the cable terminal by pressing on the latch.

4. Now connect the speaker cable of the respective box

to the corresponding connection on the subwoofer.

Check that the polarity is correct. (Polarity “ ” from

speaker to “ ” from the subwoofer and “ ” to “ ”.)

5 POWER ON/OFF switch

With this switch the system can be switched on and off.

6 Mains lead

Power supply

When you have connected all loudspeakers and devices as

described you can insert the mains plug of the subwoofer

into a correctly installed 230 volt, 50 hertz power socket.

Remote Control

Inserting the battery/batteries

(battery/batteries not supplied)

• Open the lid of the battery compartment on the back of

the remote control.

• Insert 2 batteries of type R03 “AAA” 1.5 V. Ensure that the

polarity is correct (see the oor of the battery compart-

ment)! If the remote control is not used for a prolonged

period, remove the batteries in order to prevent battery

acid leaking.

• Now close the battery compartment.

CAUTION:

• Different battery types or new and used batteries must

not be used together.

• Batteries are not to be disposed of together with

domestic wastes. Dispose of the used batteries at the

relevant collection bin or at your dealer’s.

WARNING:

Do not expose batteries to any intense heat, such as sun-

light, re, or similar. There is a danger of explosion!

When the remote control is used, care should be taken that

there are no objects between the remote control and the

central loudspeaker. (e.g. table, chair, etc.). These objects pre-

vent the infrared beam of the remote control from reaching

the receiver of the central loudspeaker. It is then not possible

to control the television with the remote control.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG BSS 4816 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 11,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG BSS 4816 Manual

Product: