Manual AEG AR 4029 DAB (page 29 of 46) (English, German)

546461

Zoom out

Zoom in

1/46

English

Connection

WARNING:

During installation damages may occur!

Have the unit installed by a specialized workshop, if

possible.

Please observe all installation and connecting instruc-

tions for safe and trouble-free operation if installing the

unit yourself.

CAUTION:

Wrong connections may damage the unit.

Use the ISO connectors when installing the unit.

Vehicle-speciﬁc ISO adapters are available at the spe-

cialized car accessories trade, if necessary.

Rear Panel Connections

A ISO connector B (speakers)

B Vehicle ﬂat fuse (15 A)

C ISO connector A (power supply)

D LINE OUT:

RCA audio output L/R for ampliﬁer

E Antenna connector

F Screw connection for the DAB antenna

Conﬁguration ISO Connectors

ISO connector A

1 Not connected

2 Not connected

3 Not connected

4 Continuous plus (memory)

5 Control voltage for electron-

ic/motor antenna or power

ampliﬁer

6 Not connected

7 12 V (ACC)

8 GND

ISO-Anschluss B

1 Speaker rear right +

2 Speaker rear right -

3 Speaker front right +

4 Speaker front right -

5 Speaker front left +

6 Speaker front left -

7 Speaker rear left +

8 Speaker rear left -

CAUTION:

Use speakers with an impedance of at least 4 Ohm.

The speaker cabling must be ﬂoating ground.

NOTE:

For connecting the unit to two speakers only use only

front speaker cables.

Please observe that for the station memory connector 4

must be connected to continuous positive.

In some vehicle models the standard conﬁguration for

connectors [4] and [7] (ISO A) is inverted. In this case

the station preset can get lost. To remedy invert these

connections 7 (ACC) and 4 (continuous positive).

Auto Antenna Power Supply A5 (ISO A)

CAUTION:

Damage to the unit is possible!

Do not connect the terminal for antenna power to the

power supply of the antenna.

Max. load: 100 mA.

The terminal for antenna power is provided for a relay-con-

trolled antenna. The relay automatically extends the antenna

when the radio is turned on. The antenna retracts again when

the radio is turned off. This terminal can also be used for an

external ampliﬁer. Please ﬁnd details in the ampliﬁer’s manual.

Connect External Ampliﬁer

Connect an external ampliﬁer via LINE OUT (D). Please ﬁnd

details in the ampliﬁer’s manual.

Installation and Removal

The unit can be installed in any ISO installation slot. Please

contact the car manufacturer or the local dealer if your vehicle

does not come with an ISO slot.

NOTE:

Before installation remove the two transport securing

screws.

Connect all cables before mounting the unit. Ensure all

connections are correct and the system works properly.

Important additional information for installation of your

car radio!

1. The set is designed for an installation where the negative

pole of the battery must be connected to the vehicle

chassis. Please check this before installatio.

2. Please note for installation/connection of your set that

not every vehicle is equipped with an “ISO connection”.

In this case we recommend the use of a vehicle-speciﬁc

ISO adapter.

Adapters are available from car accessory sellers and/or

your car workshop.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG AR 4029 DAB in the language / languages: English, German as an attachment in your email.

The manual is 5,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG AR 4029 DAB Manual

Product: