480497

AEG AR 4026 DVD Manual

31
Zoom out
Zoom in
Previous page
1/46
Next page
English
31
is displayed on the touch-screen and the selected program
type flashes.
NOTE:
If you do not make your selection after approximately
5 seconds, the list disappears again.
When PTY has been selected the radio starts searching for
corresponding PTY information and stops when the PTY
information has been found.
If the searched program type is not found, the device returns
to the last listened to radio station. “PTY NONE” flashes in
the display.
If the PTY information being searched for no longer exists,
the PTY function automatically switches to normal mode.
TA Traffic Announcement
(Radio traffic service)
(Priority for Traffic Information)
The TA function is activated by pressing the AF/TA button
briefly. The TA symbol appears in the display. During radio
operation in one FM frequency band the search for a traffic
announcement station is started automatically (SEEK).
If an FM station is being received which transmits the latest
traffic announcements from time to time, the TP display
lights up.
When the TA function is switched on, the FM traffic an-
nouncements automatically interrupt CD/USB/CARD/BT
operation (The word TRAFFIC appears in the display).
NOTE:
The volume of the traffic announcements can be adjusted
using „TA VOLUME“ in the „RADIO“ settings menu.
After the traffic announcement has finished, the programme
that was previously running is resumed.
Interruption of the TA Function:
If you would like to interrupt the current traffic announce-
ment, press the AF/TA button briefly. The TA mode is
switched off as a result.
AF (Alternative Frequencies)
REG Function
AF is a function that works with the help of RDS (Radio Data
System) and can only be used with FM stations. The radio
searches in the background for the best frequency reception
of the station that has been tuned into.
If the AF function has been switched on, the radio continu-
ously tests the signal strength of the AF frequency. The
test interval for each AF frequency depends on the signal
strength of the current station and varies from a few minutes
in the case of a strong signal to a few seconds in the case of
weak signals. Whenever the new AF frequency is stronger
than the station that is currently set, the device changes over
to this frequency for a short time. As the mute time during
the frequency change and the test time is very short, this is
almost inaudible during the normal programme.
The AF function is activated by holding down the AF/TA
button and the status of the AF function is indicated by an AF
symbol in the display.
• IftheAFsymbolappearsinthedisplay,theAFfunction
is switched on and RDS transmission data is being
received.
• IftheAFsymbolashesinthedisplay,theAFfunctionis
selected but no RDS signal can be received at the mo-
ment.
• PresstheAF/TAbuttonlongagaintoswitchoffthisfunc-
tion. The AF symbol in the display goes off.
EON Function
The device can receive RDS EON data. EON refers to
the transmission of additional station information within a
transmitter chain. In the case of a traffic announcement (TA)
the device changes within a transmitter chain from a station
without radio traffic service to a corresponding station with
radio traffic service in the transmitter chain.
In the “RADIO” settings menu you can select between the
following options:
• DX: the device attempts to obtain the EON TA informa-
tion from a station that is within range and thereby
improve the reception quality.
• LOCAL: switching over to a station whose signal level is
too weak is prevented.
Touch-Screen
The individual menus are displayed via the touch-screen. The
following settings can be carried out or changed. Change
the settings by lightly touching the screen with your finger.
Main Menu
• RADIO: select radio mode
• DISC: select CD/DVD mode
• USB: select USB mode
• SD: select CARD mode
• BLUETOOTH: select Bluetooth mode
• AV-IN: select audio/video input
• SETTING: call up the settings menu
05_AR4026DVD_AEG_SK.indd 31 03.08.11 12:32
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG AR 4026 DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG AR 4026 DVD in the language / languages: English, German as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG AR 4026 DVD

AEG AR 4026 DVD User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info