480497

AEG AR 4026 DVD Manual

29
Zoom out
Zoom in
Previous page
1/46
Next page
English
29
NOTE:
The signals from the remote control are transmitted to
the device by infrared light. You should therefore ensure
that the device is not in direct sunlight. This might make
transmission of the signals from the remote control to the
device impossible.
Effective range of the remote control
Point the remote control at the remote control sensor on the
right next to the display on the front of the device. The dis-
tance between remote control and sensor should not exceed
5 m. The angle of the remote control to the remote control
sensor to right, left, top and bottom should not exceed 30°.
Operation (Illustration 2: Control Panel)
NOTE:
Some keys are found not only on the device, but also
on the remote control and touch-screen. Keys with the
same designation have the same function.
1 Touch Screen
In addition to operation by means of the keys on the de-
vice and the remote control, it is also possible to use the
“touch-screen”. Here you can lightly touch the key shown
with your finger. Read an explanation of the touch-screen
menus in the “Touch-screen” section on page 31.
CAUTION:
Do not obstruct the touch-screen while it is being
retracted or extended. This could result in damage to
the monitor mechanism.
2 MIC (Microphone)
During a telephone call you should speak in the direction
of the built-in microphone.
3
Eject Button
Press this button to eject the CD/DVD.
4 OPEN Button
For retracting and extending the touch-screen monitor.
5 USB Connection
If you would like to play back data contained on a USB
stick, please insert the stick into the opening provided.
e word USB PLAY appears in the display. The data is
played back automatically.
NOTE:
• DuetothelargenumberofdifferenttypesofUSB
storage media that are available today it is unfortu-
nately not possible to guarantee full compatibility
with all USB storage media. For this reason there
may in rare cases be problems with the playback
of USB storage media . This is not a malfunction of
the device.
• ShouldtheUSBstoragedevicenotbeautomatical-
ly selected press the MOD button again.
NOTE:
• Toselectaspecictracknavigateusingthe
cursor buttons in the File menu and select the
track with ENTER.
• Please note: The USB connection is only designed
for playing back data from storage devices and not
for charging from other external devices (such as
smartphones). Only a low power (100 mA) power
supply can be guaranteed. This USB connection is
not designed for the use of e.g. external 2.5“ hard
drives, which may have starting currents of up to
1100 mA. For playback with your smartphone, iPod
or iPhone please use the AV IN socket provided.
Unless music playback via Bluetooth is supported.
6 AV IN Jack
To connect analogue replay devices. Using this socket it
is possible to hear the sound of other playback devices
such as MP3 players, CD players etc. through the loud-
speaker.
1. Please connect the external device with a 3.5 mm
stereo jack plug to the AV IN socket.
2. Press the MOD button (13) repeatedly until “AV IN”
appears in the display.
3. You now hear the sound from the external device
played back through the loudspeakers.
4. With the multifunction controller (11) you can change
the volume.
5. For the remaining procedure please see the operat-
ing instructions of the external sound source.
NOTE:
• Adjustthevolumeoftheexternaldevicetoa
comfortable level.
• Withthehelpoftheadaptercablesuppliedyou
can also play back the picture and sound of other
playback devices such as cameras, video players
etc. Connect the playback device in accordance
with the coloured cinch connectors of the adapter
cable (red = audio right, white = audio left, yellow =
video).
7 LCD Display (liquid crystal display)
8 IR (Infrared)
Sensor for the remote control.
9

I Button
a) In Radio mode:
For manually setting the radio station.
b) In CD/DVD mode:
To jump forwards, press the key briefly. To spool
through the titles, keep the key pressed down.
c) In Bluetooth mode:
In order to end a call or reject an incoming call.
10
II Button
Press the
II button to interrupt playback of the CD/
DVD (pause function). Press this button again to continue
listening to the CD.
05_AR4026DVD_AEG_SK.indd 29 03.08.11 12:32
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG AR 4026 DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG AR 4026 DVD in the language / languages: English, German as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG AR 4026 DVD

AEG AR 4026 DVD User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info