480502
27
Zoom out
Zoom in
Previous page
1/42
Next page
27
ENGLISH
CAUTION:
When disposing of old batteries you should strictly
comply with the legal and environmental regulations
applicable in your country. Do not throw batteries into
re!
NOTE:
• Thelithiumcellinthebatterycompartmentofthe
remote control has been secured for transport with a
foil.
Before initial use please remove
this foil so that the remote
control is ready for operation.
• Thelifetimeoftheenclosed
battery may be shortened
because of storage.
The battery of the remote control is a long-life lithium
cell. If the range of the remote control is reduced during
use, please proceed as follows:
• Openthebatterycompartmentonthebackofthe
remote control.
• Replacethecellbyabatteryofthesametype
(CR 2025). Ensure correct polarity.
• Thenclosethebatterylid.
If the remote control is not used for a prolonged period,
remove the batteries in order to prevent battery acid
leaking.
WARNING:
Do not expose the batteries to high temperatures or
direct sunlight. Never throw batteries into the re. There
is a danger of explosion!
CAUTION:
Batteries are not to be disposed of together with
domestic wastes. Dispose of the used batteries at the
relevant collection bin or at your dealer’s.
NOTE:
The signals from the remote control are transmitted to
the device by infrared light. You should therefore ensure
that the device is not in direct sunlight. This might make
transmission of the signals from the remote control to
the device impossible.
Eective range of the remote control
Point the remote control at the remote control sensor on
the right next to the display on the front of the device.
The distance between remote control and sensor should
not exceed 5 m. The angle of the remote control to the re-
mote control sensor to right, left, top and bottom should
not exceed 30°.
Operation (Illustration 2: Control Panel)
NOTE:
Some keys are to be found both on the device itself
and on the remote control. Keys with the same desig-
nation have the same function.
1
Button
Press the - button to release and detach the front
control panel.
2 On/O Button
Press this button to switch the device on. Keep this
buttonpressedtoswitchthedeviceo.
MUT
Switchesothevolumequickly.“MUTE”appearson
the display. To cancel this function, press the MUT
button again.
3 BND/AMS Button
a) Radio Operation
Press once shortly:
Briey press the BND/AMS button to switch
between FM (FM) and AM (medium wave) bands.
The designation of the corresponding level FM 1,
FM2, FM3, AM1, AM2 appears in the LCD display.
Press and hold down:
Hold down the BND/AMS button to start the
automatic station search. The stations are stored
in ascending order of frequency.
b) CD/MP3/DVD mode
Switch between the colour systems PAL, NTSC
and AUTO.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG AR 4023 DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG AR 4023 DVD in the language / languages: English, German as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info