When the button is released, the brush is rotating and the nozzle front lights are on again. You can continue to use the Ergorapido for vacuuming as usual. The
BRUSHROLLCLEAN™ TECHNOLOGY function will remain disabled. To reset, the Ergorapido must be charged continuously for at least 10 minutes in the charging
stand.
Une fois la touche relâchée, la brosse se remet à tourner et l’éclairage frontal de la brosse se rallume. Vous pouvez alors continuer à aspirer avec Ergorapido
tout à fait normalement. La fonction BRUSHROLLCLEAN™ TECHNOLOGY reste désactivée. Pour la réinitialiser, Ergorapido doit être chargé au moins pendant
10minutes consécutives sur support de charge.
Sobald die Taste losgelassen wird, dreht sich die Bürste und die vorderen Leuchten der Düse schalten sich wieder ein. Sie können den Ergorapido wieder zum
Staubsaugen verwenden. Die BRUSHROLLCLEAN™ TECHNOLOGY Funktion bleibt jedoch ausgeschaltet. Zum Zurücksetzen muss der Ergorapido mindestens
10 Minuten ohne Unterbrechungen in der Ladestation aufgeladen werden.
1. Ergorapido plus:
If - while holding the BRUSHROLLCLEAN™
TECHNOLOGY button pressed down – the
brush stops rotating, the nozzle front lights
switch off and the battery indicator light blinks
red and blue, release the BRUSHROLLCLEAN™
TECHNOLOGY button.
1. Ergorapido plus:
Si, pendant que vous appuyez sur la touche
BRUSHROLLCLEAN™ TECHNOLOGY, la
brosse cesse de tourner, l’éclairage frontal de
la brosse s’éteint et l’indicateur lumineux de la
batterie clignote en rouge et bleu, relâchez la
touche BRUSHROLLCLEAN™ TECHNOLOGY.
1. Ergorapido plus:
Hört die Bürste auf sich zu drehen, während
sie die BRUSHROLLCLEAN™ TECHNOLOGY
Taste gedrückt halten, erlöschen die vorderen
Leuchten der Düse und die Akkuanzeige blinkt
rot und blau. Lassen Sie in diesem Fall die
BRUSHROLLCLEAN™ TECHNOLOGY Taste
los.
2. Ergorapido:
If - while holding the BRUSHROLLCLEAN™
TECHNOLOGY button pressed down – the
brush stops rotating and the nozzle front lights
switch off, release the BRUSHROLLCLEAN™
TECHNOLOGY button.
2. Autres modèles Ergorapidodotés de la
touche BRUSHROLLCLEAN™:
Si, pendant que vous appuyez sur la touche
BRUSHROLLCLEAN™ TECHNOLOGY, la
brosse cesse de tourner, l’éclairage frontal
de la brosse s’éteint, relâchez la touche
BRUSHROLLCLEAN™ TECHNOLOGY.
2. Ergorapido:
Hört die Bürste auf sich zu drehen, während
sie die BRUSHROLLCLEAN™ TECHNOLOGY
Taste gedrückt halten, erlöschen die vorderen
Leuchten der Düse. Lassen Sie in diesem Fall
die BRUSHROLLCLEAN™ TECHNOLOGY
Taste los.
The BRUSHROLLCLEAN™ TECHNOLOGY
function is equipped with an overheating
protection. It will deactivate the brush roll if the
BRUSHROLLCLEAN™ TECHNOLOGY function
has been activated for more than 30 sec (constant
or interrupted) within one discharging period.
La fonction BRUSHROLLCLEAN™ TECHNOLOGY
est dotée d’une sécurité thermique. La rotation
de la brosse sera désactivée si la fonction
BRUSHROLLCLEAN™ TECHNOLOGY a
été activée pendant plus de 30secondes
(consécutives ou non) au cours d’une phase de
décharge de la batterie.
Die BRUSHROLLCLEAN™ TECHNOLOGY
Funktion ist mit einem Überhitzungsschutz
ausgestattet. Dieser schaltet die Bürstenrolle aus,
wenn die BRUSHROLLCLEAN™ TECHNOLOGY
Funktion während eines Reinigungsvorgangs
länger als 30 Sekunden (mit oder ohne
Unterbrechungen) eingeschaltet war.
Cleaning the brush roll with the BRUSHROLLCLEAN™ TECHNOLOGY function* / Nettoyage de la brosse avec la
fonction BRUSHROLLCLEAN™ TECHNOLOGY* / Reinigen der Rollenbürste mit der der BRUSHROLLCLEAN™
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for AEG AG935 Ergorapido at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of AEG AG935 Ergorapido in the language / languages: English, German, Dutch, French as an attachment in your email.
The manual is 10,81 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
