640477

AEG AG935 Ergorapido Manual

12
Zoom out
Zoom in
Previous page
1/30
Next page
10
1. First turn Ergorapido off. Push the brush roll
release button. The hatch cover will come slightly
free and the brush roll can be removed.
1. Loosen the catch and pull the hose from the
attachment. Remove any debris. Put the hose
back, lock using the catch.
2. If the wheels needs to be cleaned, remove them
carefully by using a small screwdriver.
3. Remove objects that may have become
jammed in the wheel shafts. Reassemble the
wheels by pressing them back into their tracks.
2. Lift out the brush roll and clean it. Use a sharp
object to remove threads. Reassemble the roll,
making sure it can spin freely. Close hatch cover.
Cleaning the brush roll /
Cleaning the hose and wheels /
Cleaning /
To remove thicker threads or wires as well
as on models that are not equipped with the
BRUSHROLLCLEAN™ TECHNOLOGY, the brush
should be cleaned according to the following
instructions.
Pour ôter les fils et fibres plus épais ainsi que pour
nettoyer la brosse sur les modèles non équipés de la
technologie BRUSHROLLCLEAN™ TECHNOLOGY,
merci de suivre les instructions suivantes.
1. Commencer par arrêter Ergorapido. Appuyer
sur le bouton de déverrouillage de la brosse
rotative. La trappe d'accès à la brosse rotative est
alors partiellement libérée pour qu’elle puisse être
retirée.
1. Déserrer le cliquet et retirer le coude d’aspiration
flexible de sa fixation. Retirer les saletés. Remettre
le coude d’aspiration flexible en place et le bloquer
à l'aide des cliquets.
2. Si un nettoyage des roues s'avère nécessaire,
les retirer avec précaution à l'aide d'un petit
tournevis.
3. Retirer ce qui pourrait être éventuellemen
coincé dans les axes de roues. Remettre les roues
en place en les ajustant sur leurs rails.
2. Retirer la brosse rotative et la nettoyer. Retirer
les fils à l'aide d'un objet tranchant. Remonter la
brosse rotative en s'assurant qu'elle peut tourner
librement. Refermer la trappe d'accès.
Nettoyage de la brosse rotative /
Nettoyage du flexible et des roues /
Nettoyage /
Zum Entfernen stärkerer Fäden oder Drähte sowie in
Modellen, die nicht mit der BRUSHROLLCLEAN™
TECHNOLOGY Funktion ausgestattet sind, muss
die Bürste entsprechend der folgenden Anleitung
gesäubert werden.
1. Zuerst Ergorapido ausschalten. Freigabeknopf
der Bürstenrolle drücken. Die Lagerabdeckung
löst sich etwas, sodass sich die Bürstenrolle
herausnehmen lässt.
1. Verriegelung lösen und Schlauch vom
Saugstutzen abnehmen. Etwaigen Schmutz
entfernen. Schlauch wieder aufsetzen und mit
Verriegelung befestigen.
2. Falls die Räder gereinigt werden müssen, diese
vorsichtig mit einem kleinen Schraubendreher
abnehmen.
3. Gegenstände beseitigen, die möglicherweise
in den Radachsen eingeklemmt wurden. Räder
durch Hineindrücken in ihre Führungen wieder
zusammenbauen.
2. Bürstenrolle herausnehmen und reinigen. Fäden
mit einem scharfen Gegenstand entfernen. Rolle
wieder einsetzen und auf Freigängigkeit achten.
Lagerabdeckung schließen.
Reinigen der Bürstenrolle
Reinigen von Schlauch und Rädern
Reinigen
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG AG935 Ergorapido at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG AG935 Ergorapido in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info