672653
16
Zoom out
Zoom in
Previous page
1/24
Next page
ENTREE PHONO ET MASSE PHONO
Vous pouvez brancher votre platine disque sur les entrées RCA gauche (L) et droite (R). Les platines
disque sont généralement munis d’un fil de terre que vous devez connecter sur «ground of phono»
en dévissant puis vissant ce connecteur en coinçant le fil de terre de la platine.
Vous pouvez adapter votre cellule à l’entrée phono de votre préamplificateur PX1. Cellule à aimant
mobile (MM) ou bobine mobile (MC), haut et bas niveau (MC LOW ou MC HIGH).
La capacitance est elle aussi réglable (100P/200P/320P).
PHONO INPUT AND GROUND TERMINAL
You can connect your turntable on the RCA connectors left (L) and right (R). Turntables normally
includes a single wire earth lead. Use the phono ground connector to connect this lead. Unscrew
the terminal to expose the hole which will accept the lead. After insertion, tighten the terminal to
secure the lead.
You can choose suitable Phono type(MC LOW/MM/MC HIGH) and phono capacitance
(100P/200P/320P)
PHONO EINGANG UND MASSE ANSCHLUSS
Sie können Ihren Plattenspieler an den Phono RCA links (L) und rechts (R) anschließen.
Plattenspielern liegt in der Regel ein extra Massekabel bei. Schließen Sie das Massekabel des
Plattenspielers an die Masse Schraubklemme des PX1 an. Schrauben Sie dazu den Anschluss
am PX1 soweit auf bis Sie das Loch am Anschluss sehen. Stecken Sie das Massekabel Ihres
Plattenspielers in das Loch und drehen Sie die Schraubklemme so fest zu, dass das Kabel sicher
in der Schraubklemme sitzt. Sie können den passenden Phono Typ (MC LOW/MM/MC) und die
passende Phono Kapazität (100P/200P/320P) wählen.
INGRESSO PHONO E MESSA A TERRA
E’ possibile collegare il proprio giradischi ai connettori RCA sinistro (L) e destro (R). I giradischi
normalmente includono un cavo singolo per la messa a terra. Utilizzare il connettore phono della
messa a terra per il collegamento di questo cavo. Svitare il terminale per esporre il foro che
accetterà il cavo. Dopo l’inserimento, serrare nuovamente il terminale per fissare il cavetto. E’
possibile scegliere la più adatta classificazione phono (MC LOW/MM/MC HIGH) e capacità
(100P/200P/320P)
SORTIE SUBWOOFER / CAISSON DE GRAVE
Permet de connecter un caisson de grave
SUBWOOFER OUTPUT
To connect an active subwoofer
SUBWOOFER OUT
Zu active subwoofer anschließen
SUBWOOFER TERMINALI
Permette di collegare subwoofer
j
k
16


Need help? Post your question in this forum.

Forumrules
1

Forum

advance-acoustic-px1

Reset search

  • how can i connect tha preamplifier px1 with the ampli bx1 ? Submitted on 13-2-2020 at 21:40

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Advance Acoustic PX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Advance Acoustic PX1 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info