672653

Advance Acoustic PX1 Manual

15
Zoom out
Zoom in
Previous page
1/24
Next page
INGRESSI BILANCIATI XLR
Se la vostra sorgente dispone di una uscita stereo bilanciata, si può collegare la stessa all’ingresso
XLR stereo bilanciato del preamplificatore PX1.
Connector ground terminal: Chassis grounded
The pin assignments for this terminal are given above.
The amplifier uses the European type XLR terminal.
ENTRÉES DES SOURCES
Vous devez connecter vos sources sur les entrées stéréophoniques correspondantes. Toutes ces
entrées sont normalisées, elles conviennent à toutes sources standards
comme des tuners, des lecteurs CD, des lecteurs MP3, des lecteurs DVD, etc...
Remarque : Ces entrées conviennent uniquement à des signaux audio analogiques. Elles ne doivent
pas être raccordées à la sortie numérique d’un lecteur de CD ou d’un autre appareil à sortie
numérique.
INPUTS
You can connect your stereo sources on those inputs. These inputs are suitable for any line level
source equipment such as tuners, CD players, DVD, MP3 players, etc.
Note: These inputs are only for analogue audio signals. They should not be connected to the digital
output of a CD player or any other digital device.
AUDIO EINGÄNGE
Diese RCA-Eingänge dienen zum Anschluss Ihrer Signalquellen wie Tuner, CD-Player, MP3-Player,
DVD-Player, etc ...Hinweis: Diese Eingänge sind nur für analoge Audiosignale.
INGRESSI
A queste prese si possono collegare i Vostri apparecchi stereo. Questi ingressi sono adatti a tutte
le sorgenti linea quali Cd, Dvd, lettori MP3,ecc e per segnali di tipo analogico. Non devono essere
collegati a uscite digitali.
FREQUENCES DE COUPURE DU CAISSON DE GRAVE 75/150Hz
Vous pouvez sélectionner la fréquence de coupure de votre caisson de grave sur 75 Hz ou 150Hz.
En simplifiant, une fréquence de coupure de 150Hz est plus adaptée au petit caisson de grave et
75Hz pour les caissons plus imposants capables de restituer les fréquences inférieures à 75Hz.
CROSSOVER FREQ. 150Hz/75Hz
Switch this button to set the crossover frequency of subwoofer at 150Hz or 75Hz. Broadly speaking,
the 150Hz setting is for smaller subwoofer that don’t have much output below 100Hz. The 75Hz
setting is for conventional powerful subwoofer.
FREQUENZÜBERGANG 150Hz/75Hz
Mit diesem Schalter können Sie die Trennfrequenz für Ihren Subwoofer auf 150Hz oder 75Hz
einstellen. Die 150Hz Trennfrequenz ist für kleine Subwoofer die bauartbedingt nicht weit unter
100Hz kommen gedacht. Die 75Hz Trennfrequenz ist für größere Leistungsstarke Subwoofer.
FREQUENZE CROSSOVER 150Hz/75Hz
Selezionare questo pulsante per impostare la frequenza crossover del subwoofer a 150Hz o 75Hz. In
linea di massima, l’impostazione 150Hz è per subwoofer più piccoli che hanno poca potenza, sotto i
100Hz. L’impostazione 75Hz è per subwoofer convenzionali più potenti.
g
h
… 15 …


Need help? Post your question in this forum.

Forumrules
1

Forum

advance-acoustic-px1

Reset search

  • how can i connect tha preamplifier px1 with the ampli bx1 ? Submitted on 13-2-2020 at 21:40

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Advance Acoustic PX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Advance Acoustic PX1 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info