618554

Adobe ACROBAT X PRO Manual

434
Zoom out
Zoom in
Previous page
1/496
Next page
428
USING ACROBAT X PRO
Print production tools
Last updated 10/11/2011
Pastel inks These inks are normally lighter than their process equivalents. You may want to set the ND value for these
inks lower than their default values to ensure that they spread into adjacent darker colors.
Other spot inks Some spot colors, such as turquoise or neon orange, are significantly darker or lighter than their
CMYK equivalents. You can determine whether this is the case by comparing printed swatches of the actual spot inks
to printed swatches of their CMYK equivalents. You can adjust the spot ink’s ND value higher or lower as necessary.
Customize trapping for specialty inks
Using certain inks involves special trapping considerations. For example, if you are using a varnish on your document,
you don’t want the varnish to affect trapping. However, if you’re overprinting certain areas with a completely opaque
ink, you don’t need to create traps for items underneath. Ink options are available for these situations. It’s usually best
not to change the default settings, unless your prepress service provider recommends changing them.
Note: The speciality inks and varnishes used in the document may have been created by mixing two spot inks or by mixing
a spot ink with one or more process inks.
1 Open the Ink Manager and select an ink that requires special treatment.
2 For Type, choose one of the following options, and then click OK:
Normal Use for traditional process inks and most spot inks.
Transparent Use for clear inks to ensure that underlying items trap. Use this option for varnishes and dieline inks.
Opaque Use for heavy, nontransparent inks to prevent trapping of underlying colors but allow for trapping along the
ink’s edges. Use this option for metallic inks.
Opaque Ignore Use for heavy, nontransparent inks to prevent trapping of underlying colors and to prevent trapping
along the ink’s edges. Use this option for those inks, such as metallics and varnishes, that have undesirable interactions
with other inks.
More Help topics
“Ink Manager overview” on page 435
Adjust the trapping sequence
The trapping sequence (also called the trapping order) matches the order in which inks are printed at the press, but it
doesn’t match the order in which separations are produced at the output device.
The trapping sequence is particularly important when you’re printing with multiple opaque colors, such as metallic
inks. Opaque inks with lower sequence numbers are spread under opaque inks with higher sequence numbers. This
process prevents the last applied ink from being spread, and it still creates good traps.
Note: Don’t alter the default trapping sequence without first consulting with your prepress service provider.
1 Open the Ink Manager. The current trapping sequence is displayed in the Sequence column of the inks list.
2 Select an ink, type a new value for Trapping Sequence, and then press Tab. The sequence number of the selected
ink changes, and the other sequence numbers change accordingly.
3 Repeat the previous step for as many inks as necessary, and then click OK.
More Help topics
“Ink Manager overview” on page 435
… 434 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adobe ACROBAT X PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adobe ACROBAT X PRO in the language / languages: English as an attachment in your email.

The manual is 24,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info