618554

Adobe ACROBAT X PRO Manual

432
Zoom out
Zoom in
Previous page
1/496
Next page
426
USING ACROBAT X PRO
Print production tools
Last updated 10/11/2011
best results, use a value from 8% to 20%. Lower percentages increase sensitivity to color differences and result in more
traps.
Black Color Indicates the minimum amount of black ink required before the Black trap width setting is applied. The
default value is 100%. For best results, use a value no lower than 70%.
Black Density Indicates the neutral density value at or above which InDesign considers an ink to be black. For
example, if you want a dark spot ink to use the Black trap width setting, enter the neutral density value here. This value
is typically set near the default of
1.6.
Sliding Trap Determines when the trapping engine starts to straddle the centerline of the color boundary. The value
refers to the proportion of the lighter color’s neutral density value to a darker, abutting color’s neutral density value.
For example, setting the Sliding Trap value to 70% moves the point at which the trap begins to straddle the centerline
to where the lighter color exceeds 70% of the darker color in neutral density (lighter color’s neutral density divided by
darker color’s neutral density
> 0.70). Colors of identical neutral density will always have their traps exactly straddle
the centerline, unless the Sliding Trap is set to
100%.
Trap Color Reduction Indicates the degree to which components from abutting colors are used to reduce the trap
color. This setting is useful for preventing certain abutting colors (such as pastels) from making an unsightly trap that
is darker than either color. Specifying a Trap Color Reduction lower than 100% begins to lighten the color of the trap;
a Trap Color Reduction value of 0% makes a trap with a neutral density equal to the neutral density of the darker color.
Trapping imported graphics
You can create a trap preset to control traps within images, and to control traps between bitmap images (such as
photographs and those saved in raster PDF files) and vector objects (such as those from a drawing program and vector
PDF files). Each trapping engine handles imported graphics differently. It’s important to be aware of these differences
when setting trapping options.
Trap Placement Provides options for determining where the trap falls when you trap vector objects (including objects
drawn in InDesign) to bitmap images. All options except Neutral Density create a visually consistent edge. Center
creates a trap that straddles the edge between objects and images. Choke causes objects to overlap the abutting image.
Neutral Density applies the same trapping rules as used elsewhere in the document. Trapping an object to a
photograph with the Neutral Density setting can result in noticeably uneven edges as the trap moves from one side of
the edge to another. Spread causes the bitmap image to overlap the abutting object.
Trap Objects To Images Ensures that vector objects (such as frames used as keylines) trap to images, using the Trap
Placement settings. If vector objects don’t overlap images in a trapping page range, consider turning this option off to
speed trapping of that page range.
Trap Images To Images Turns on trapping along the boundary of overlapping or abutting bitmap images. This feature
is on by default.
Trap Images Internally Turns on trapping among colors within each individual bitmap image (not just where they
touch vector artwork and text). Use this option only for page ranges containing simple, high-contrast images, such as
screen shots or cartoons. Leave it unselected for continuous-tone and other complicated images, as it will create bad
traps. Trapping is faster when this option is unselected.
Trap 1-Bit Images Ensures that 1-bit images trap to abutting objects. This option doesn’t use the Image Trap
Placement settings, because 1-bit images use only one color. In most cases, leave this option selected. In some cases,
such as with 1-bit images where pixels are widely spaced, selecting this option may darken the image and slow the
trapping.
… 432 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adobe ACROBAT X PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adobe ACROBAT X PRO in the language / languages: English as an attachment in your email.

The manual is 24,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info