800029
7
Zoom out
Zoom in
Previous page
1/148
Next page
7
14. Do not put your fingers or any objects or metal foreign objects inside the product, through
the ventilation grille and other slots, otherwise it may cause electric shock or malfunction.
15. Do not put any objects on top of the device. Vents must not be
covered by a towel, curtain, etc. It may damage the device or cause a fire.
16. The device heats up during operation, do not touch hot parts of the device. Do not touch the
device with wet hands.
17. If the convector gets wet or any object falls through
the convector ventilation grille, turn it off immediately and disconnect it from the mains. Before
relaunching
using the convector, contact the service.
18. Do not place the machine directly below an electrical socket.
19. Always switch the device off using the buttons before disconnecting it from the mains.
20. Do not use this device if it has been dropped.
21. Do not use if there are visible signs of damage to the device.
22. Use the heater on a level and stable surface or attach it to the wall, if provided for by the
manufacturer.
23.All items should be at least 1 meter from the front and sides of the device.
24. Do not insert or allow foreign objects to enter the ventilation or exhaust vents as this may
result in electric shock, fire or damage to the product.
25. A common cause of overheating is dust or lint inside the device. Make sure these deposits
are removed regularly by unplugging the unit and vacuuming the vents and grilles, filters, if
available.
26. Do not use this device in a window as rain may cause electric shock.
27.Do not connect the appliance to a power source until it has been installed in its final position
and placed in the position for use.
28. It is not recommended to use an extension cord with this device.
29.Do not place the cord under carpets, rugs, rugs, etc. Keep the cord away from places where
it may trip over it.
30.Do not use this device with a programmer, timer or any other device that automatically turns
on the heater as there is a risk of fire if the device is covered or placed incorrectly.
31. To avoid the danger of inadvertently resetting the thermal cutout, this appliance must not
be powered by an external switching device, such as a clock, or connected to a circuit that is
regularly turned on and off by the mains.
32. Do not get the device wet. If the device falls into water, disconnect the plug from the socket
immediately. Do not put your hands into the water when the device is plugged in. Before re-
use, it must be checked by an authorized service center.
33. The device should be switched off whenever you put it down.
34. Never turn on the device when the tank is not filled with water.
35. Use only clean, cool water.
36. Do not pour water into the tank above the maximum level.
37. Do not submerge the base of the device.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 7730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 7730 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info