734443

Adler AD 5032 Manual

4
Zoom out
Zoom in
Previous page
1/100
Next page
when you rotate the iron, as in the tank, even when disconnected from the power
supply iron, may still be in hot water.
19. DO NOT allow for prolonged contact hot steam iron with fabric or flammable materials.
20. Be careful that the power cord does not touch the hot soleplate. Allow the iron to cool
completely before storage.
21. If you do not use iron, even for a short time, turn off the options of steam
22. Under no circumstances should be ironed clothes and fabrics that are on humans or
animals.
23. Never direct the steam to humans or pets.
24. Use self-cleaning function at least once a month.
25. Iron must be used at a stable even surface and this can only be disposed of.
26. Do not fill the water tank with chemicals, perfumes or descaling substance.
27. Do not fill the water tank over MAX level.
DESCRIPTION OF DEVICE
A. Spray nozzle B. The water inlet hole
C. Steam control switch D. Spray button
E. Steam burst button F. Power Cord
G. Rotary cable gland H. Heating / Thermostat indicator light
I. Temperature control knob - thermostat J. Self-clean button
K. Water tank L. Ceramic coated soleplate
M. Power indicator light N. Synthetic fabric – one drop
O. Silk – Wool fabric – two drops
INDICATOR LIGHT:
Plug in the iron, the power indicator light (M) turns on (always), when the thermostat works,
the heating indicator light (H) turns on, once the thermostat off work, the heating indicator light (H) turns off.
FILLING WITH WATER:
1. Set the steam control (C) to "0" (= no steam).
2. Open the water filling cover and turn the iron at a 45° angle to a flat, dry surface.
3. Fill the water tank with water to “MAX”.
4. Push the water filling cover to close it.
PREPARATION:
Sort the laundry to be ironed according to the international symbols on the garment label, or if this is missing, according to the type of
fabric.
Caution: If the fabric consists of various kinds of fibers, always select the lowest ironing temperature of the composition of those fibers.
Start ironing the garments requiring a low temperature. This reduces the waiting times (the iron takes less time to heat up than to cool
down) and eliminates the risk of scorching the fabric.
FIRST USE
When using the iron for the first time, you may notice a slight emission of smoke and hear some sounds made by the expanding
plastics. This is quite normal and it stops after a short time. We also recommend passing the iron over an ordinary cloth when using it
for the first time.
DRY IRONING (without steam) FUNCTION
1. Connect the power cord of the appliance to the wall outlet.
2. Turn the temperature control knob (I) to the desired temperature depending on the type of fabric you want to iron. Make
ENGLISH
GARMENT
LABEL
FABRIC
TYPE
THERMOSTAT
REGULATION
synthetic ·
low temperature
silk - wool ··
medium temperature
Cotton - linen ···
high temperature
Fabric not to be ironed
4
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 5032 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 5032 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info