641826

Ade BA 830 Bettina Manual

8
Zoom out
Zoom in
Previous page
1/28
Next page
4. Weighing function (weight measurement only)
1. Switch-on the scale by using the tap-on-function. For this, tap with your foot
shortly on the centre of the scale. The display indicates the signal “0.0 kg”. Now
the scale is ready to use.
2. Step on the centre of the scale. Remain stationary on the weighing platform and
do not you hold tight. After a few seconds, your weight will be indicated.
3. After weighing, step off the scale. The scale will automatically switch-off after a
few seconds.
5. Programming / Enter of personal data
Before first time use your personal data like gender (female or male), body height, age
and fitness level (A1 = no sport, A2 = occasional sport, A3 = regular sport, A4 = daily
sport, A5 = athlete) must be programmed and saved under selected locations 1 – 12
(up to 12 persons). The enter keys are located at the head front of the scale. To enter
your personal data please utilise the buttons: (minus button), (plus button), SET
(save button) and follow the particular points:
1. Place the scale on a table. Switch-on the scale by
using the tap-on-function. For this, tap with your
hand shortly on the centre of the scale. The display
will indicate the signal “0.0 kg”. To select your
personal location (01-12) press the SET-button and
select your personal location by using the or
button. Press the SET-button to save the reading.
2. After you’ve selected your personal location (e.g. 03)
the symbol for gender starts to flash. To select the
requested gender (
female or male), press the
or button. After the selection of your gender press
the SET-button to save the reading.
3. After you’ve selected your gender (e.g. female) the
symbol for body height starts to flash (default
170cm). To enter your height press the or
button. After the selection for your height press the
SET-button to save the reading.
4. After you’ve selected your body height the symbol for
age starts to flash (default Age 30). To enter
your press the or button. After the selection of
your age press the SET-button to save the reading.
5. After you selected your age the symbol for fitness level
starts to flash (default A1). To enter your fitness level
(A1-A5), press the
or button. After the selection
of your fitness level, press the SET-button to save the
reading.
A few seconds after completion of the input, the scale automatically power-off.
To enter personal data of further persons or to change already stored data please
repeat the steps listed below.
6. Body Analysis
An analysis is only possible in bare feet. Your personal data must be entered first
(please see page 4-5).
1. Switch-on the scale by using the tap-on-function. For this, tap with your foot shortly
on the centre of the scale. The display indicates the signal „8888“ and a few seconds
later “0.0 kg”. To select your personal location (01–12), press the
or button.
2. At the first time measurement, the display indicates the under this location stored
data and a few seconds later „0.0” kg. When you once used the scale, the display
indicates at first the under this location stored data and afterwards the
readings of your last measurement. This function allows you to follow the
changes between your measurements.
3. As soon as “0.0 kg” appears on the display, the scale is prepared for the
measurement.
4. Carefully in bare feet step on the stainless steel strips on the right and left side of
the weighing platform and remain stationary while the measurement is now taking
place.
5. At first, your weight will be indicated. Shortly after, while the analysis is taking place
the signal “
“ start to move. After completion of the measurement, the display
indicates as follows: weight, body fat, body water, and BMI (body mass index).
EXAMPLE:
4 5
0l
Age
30 170
cm
A 1
A 1
Age
30
170
cm
0
3
0
3
Age
30 170
cm
A 1
0
3
56.4
kg
23.4
BMI
F
23.8%
W
57.3%
F
=
Body Fat %
W = Body Water %
BMI = Body Mass Index
Normal BMI range for men: between 20 and 25
Normal BMI range for women: between 19 and 24
Normal BMI for elder persons: up to 26
Age
30 170
cm
A 1
0
3
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ade BA 830 Bettina at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 830 Bettina in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info