461422
39
Zoom out
Zoom in
Previous page
1/68
Next page
DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 37
Issue 1.2
11.6 CHASER INTENSITY
The OVERALL level of a chaser is controlled by the submaster containing the chaser.
The chaser can be faded in or out as required (its fade times are controlled manually) or the
chaser may be “Flashed” (soloed or bumped) via its [f/a] button.
If the chaser is faded down to zero, the chaser automatically stops.
11.7 CONTROLLING A CHASER
Select” allows you to change the speed, crossfade, mode and direction of the copy of the
chaser in the selected submaster without affecting the original chaser. To make permanent
changes to a chaser see “Editing a Chaser” below.
Press [select], [f/a] (chaser to control), [function].
To control the SPEED, rotate the EDIT wheel. The display shows the speed in Beat per
Minute.
To change the CROSSFADE between steps, press [function] until both “in” & “out” LEDs
light, then rotate the EDIT wheel. The display indicates the percentage of time between
steps to be used for the crossfade. See CROSSFADE for more details
To change the MODE or DIRECTION use the 3 buttons below the EDIT wheel as follows;
BUTTON ACTION
[step/stop] STOPS a running chaser or STEPS
a stopped chaser
[>] (Forward)
RUNS A CHASER FORWARD
[<] (Reverse)
RUNS A CHASER REVERSE
Hold [>] Tap [<] Selects BOUNCE mode
[>] or [<]
De-selects BOUNCE mode
Hold [step/stop] Tap [>] Selects SINGLE SHOT mode
[>] or [<] RUNS A SINGLE SHOT
Hold [step/stop] Tap [>]
De-selects single shot mode
When finished controlling press [select].
The changes that you have made are retained in the submaster until such time as the chaser
is replaced on that submaster (by changing pages or mode).
To restore the original content to the submaster press [copy], [f/a] to the same [f/a].
11.7.1 STEPPING A CHASER
A chaser may be manually stepped at any time by pressing its [f/a] button. If the chaser is
already running, this will immediately step it to the next step.
To manually step a chaser, stop the chaser (above), then step it by pressing its [f/a] button.
11.7.2 RUNNING A SINGLE SHOT
If a chaser has been set to “single shot” mode (above), pressing its [f/a] button will run a
single shot.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ADB ME1163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ADB ME1163 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ADB ME1163

ADB ME1163 User Manual - German - 72 pages

ADB ME1163 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info