461422
38
Zoom out
Zoom in
Previous page
1/68
Next page
DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 36
Issue 1.2
11.3.1 REMOVING STEPS
Whilst recording (above), if the step that you add is not correct, the last step may be deleted
by pressing [remove].
11.3.2 CHASER SPEED
At any point after giving the chaser a submaster (above), repeated presses of [function] will
toggle the display between the STEP number, the SPEED in BPM (Beats Per Minute) and
the CROSSFADE percentage. When the SPEED is displayed, the EDIT wheel may be used
to set the desired speed. The default setting is 100 BPM but you may change this in the
“Setup Preferences”. See the “UTILITIES” section.
11.3.3 CHASER CROSSFADE
At any point after giving the chaser a submaster, repeated presses of the [function] button
will toggle the display between the STEP number, the SPEED setting in BPM (Beats Per
Minute) and the CROSSAFDE percentage. When the IN & OUT indicators are lit, the EDIT
wheel may be used to set the percentage of the chaser speed time that is used for the
crossfade.
The default setting is 0% (no crossfade) but you may change this in the “Setup Preferences”.
11.3.4 COMPLETING THE CHASER
When all steps have been recorded, and the speed and crossfade have been set, complete
the chaser by pressing [record chaser].
The chaser will be a conventional forward running chase. To select other chaser modes
either [select] or [edit] the chaser as described below.
11.4 NAMING A CHASER
Each chaser is by default given its Bank B, page and f/a number as a name. For example,
B1:02 (bank B, page 1, chase 2).
To enter or change a name, HOLD [function], tap [f/a] (name) (bank A f/a button). The
display says “Pick Object to Name”. Press [page] (optional) [f/a] (submaster memory
number). Either rotate the EDIT wheel or press the [f/a] buttons for the desired characters or
the bank [f/a] buttons for numbers 1 to10 (0) as labelled below the buttons. Where several
characters are printed below each button, multiple presses select the next character in a
similar fashion to a mobile telephone keypad.
Press [<] or [>] to move the cursor and press [remove] or [add] to remove or add characters
or spaces. When finished, press [ok].
11.5 CHASER PLAYBACK
Chasers may be replayed on the:
Submasters
Grab master
As a step in a Cue list.]
11.5.1 SUBMASTERS
When you set the mode to “memory”, the chasers (and memories) in the current page are
copied, in order, to their respective submasters.
If you change pages, the chasers (and memories) in the selected page are copied, in order,
to their respective submasters.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ADB ME1163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ADB ME1163 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ADB ME1163

ADB ME1163 User Manual - German - 72 pages

ADB ME1163 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info