620410
46
Zoom out
Zoom in
Previous page
1/68
Next page
System Control - ACVMax: 660Y2800 • B
en
46
EN
FR
NL
ES
IT
DE
PL
RU
CASCADE MENU DESCRIPTION AND OPERATION  SOLO 2 PUMPS
Cascade Menu / Cascade Settings (Contd)
Cascade Setting
Stage Delay 60 sec
Minimum Firing Rate 25%
Max. Firing Rate 250 kW
CH / DHW Boilers 0
Auto Rotation Enabled
CH Prop. Gain 7
Cascade Setting
Stage Delay 60 sec
Minimum Firing Rate 25%
Max. Firing Rate 250 kW
CH / DHW Boilers 0
CH Prop. Gain 7
Auto Rotation Enabled
Maximum
Firing Rate
250 kW
0 kW 255 kW
Maximum Firing Rate is the maximum capacity of a single boiler in the Cascade System.
Press the LEFT or RIGHT buttons to adjust the Maximum Firing Rate then press the OK button
to store the setting.
This value will be 42, 50, 75 100 or 120 kW for the actual appliance range.
Default: 250 kW
Stable cascade operation requires that all boilers in a cascade System be the same
size. Mixing boiler sizes in a cascade System could lead to temperature fluctuations
and erratic cascade operation.
Cascade Setting
Stage Delay 60 sec
Minimum Firing Rate 25%
Max. Firing Rate 250 kW
CH / DHW Boilers 0
CH Prop. Gain 7
Auto Rotation Enabled
CH / DHW Boilers
0
0 6
The CH or DHW Boilers setting species how many boilers in a Split Cascade System will re-
spond to a domestic hot water call. The CH or DHW Boilers always include the Master boiler. The
remaining boilers will only respond to central heating calls. This allows the Cascade System to
satisfy both central heating and domestic hot water calls at the same time. At the completion
of a domestic hot water call, the CH or DHW Boilers will again be available to respond to central
heating calls.
Press the LEFT or RIGHT buttons to adjust the CH or DHW Boilers setting then press the OK
button to store the setting
The maximum number of boilers in a cascade is 4. Therefore, do not select a higher
number than 3 in this menu as one should never adjust to the same number as he
has appliances in the cascade. This would override the Split of the system. Failure
to comply may result in faults in the cascade operation.
Cascade Setting
Stage Delay 60 sec
Minimum Firing Rate 25%
Maximum Firing Rate 250 kW
CH / DHW Boilers 0
CH Prop. Gain 7
Auto Rotation Enabled
Auto Rotation
Enabled
Disabled
Through the Auto Rotation function, the number of burning hours is equalized over all appli-
ances.
When the function is Enabled, the appliances will all run an equal amount of time. This helps
balancing wear over the appliances.
When the function is Disabled, there is no levelling of burning hours and the rst appliances in
the sequence will run more than the last one in the sequence.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACV Prestige at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACV Prestige in the language / languages: English as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info