620410
45
Zoom out
Zoom in
Previous page
1/68
Next page
en
45
System Control - ACVMax: 660Y2800 • B
EN
FR
NL
ES
IT
DE
PL
RU
CONFIGURATION OF CASCADE SYSTEMS  SOLO 2 PUMPS
Cascade Menu / Cascade Settings (also refer to “Cascade system connection (4-boiler Cascade)” on page 50)
Cascade Settings
?
The Cascade Settings menu contains settings related to cascade operation. Each line contains
a Cascade Setting followed by its current value. Six Cascade Settings are displayed on the screen
at one time.
Press the UP or DOWN buttons to scroll through additional Cascade Settings.
Cascade Setting changes must be made on the cascade Master. Cascade autode-
tection must be performed after making any changes to a cascade Setting before
the change will take eect.
Cascade Setting
Stage Delay 60 sec
Minimum Firing Rate 25%
Max. Firing Rate 250 kW
CH / DHW Boilers 0
Auto Rotation Enabled
CH Prop. Gain 7
Stage Delay
60 sec.
0 sec. 255 sec.
Stage Delay sets the time delay before enabling or disabling a boiler in the Cascade System.
The Stage Delay begins once the Master boiler determines that a boiler must be enabled to
reach the setpoint or when the Master boiler determines a boiler should be disabled because
of a decreasing load.
Press the LEFT or RIGHT buttons to adjust the time then press the OK button to store the setting.
Adjusting the Stage Delay will have the following eects:
Increasing Stage delay
- Reaching the setpoint could take longer due to a longer delay between enabling boilers.
- Overshooting the setpoint could occur due to boilers staying on longer before being disabled.
Decrease Stage delay
- Overshooting the setpoint could occur due to boilers being enabled quicker.
- Boilers will be disabled quicker, possibly increasing boiler cycling and decreasing runtimes.
Cascade Setting
Stage Delay 60 sec
Minimum Firing Rate 25%
Max. Firing Rate 250 kW
CH / DHW Boilers 0
Auto Rotation Enabled
CH Prop. Gain 7
Minimum Firing Rate
25 %
0 % 100 %
Minimum Firing Rate is the minimum ring rate of a single boiler in the Cascade System. The
Master boiler uses this setting to determine when boilers can be enabled and disabled.
Setting the Minimum Firing Rate below the recommended minimum will result in boilers being
enabled too quickly which may cause sharp increases in temperature from the Cascade System.
Setting the Minimum Firing Rate above the recommended minimum will delay the enabling of
boilers which may lower the system eciency.
Press the LEFT or RIGHT buttons to adjust the Minimum Firing Rate then press the OK button
to store the setting.
Default : 25%
Only make changes after being instructed to do so by ACV as changing of this
value may cause instability in the appliance cascade control.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACV Prestige at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACV Prestige in the language / languages: English as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info