Manual Actiontec MI424WR (page 163 of 171) (English)

629196

163

Zoom out

Zoom in

1/171

160

Actiontec Wireless Broadband Router User Manual

161

Appendix A Quality of Service

Protocol - Select a specific traffic protocol from the drop-down list, or add a new

one. To add a new traffic protocol:

1. Select Specify Protocol from the drop-down list. The screen will refresh

and an “Add” link appears.

2. Click Add, and add a new protocol. This is the same as clicking “New

Entry” in the “Protocols” screen.

DSCP -Use this drop-down list to mark a DSCP value on packets matching a

connection that matches this rule. To do so, select Specify from the drop-down

list and enter the hexadecimal value of the DSCP.

Set Priority - Activate this check box to add a priority to the rule. The screen

will refresh, allowing a selection of one of eight priority levels, zero being the

lowest and seven the highest (each priority level is mapped to low/medium/high

priority). This sets the priority of a packet on the connection matching the rule,

while routing the packet.

Log Packets Matched by This Rule - Check this check box to log the first packet

from a connection that was matched by this rule.

When should this rule occur? - By default, the rule will always be active.

However, scheduler rules can be configured to define time periods during which

the rule is active. To learn how to configure scheduler rules, see the “Advanced

Settings” chapter.

☞

Note: The hierarchy of the class rules is determined by the addi-

tion order to the class. For example, if the first rule is “match

packets with any source address, any destination address, and

any protocol to this class,” all packets traveling through Router

will be associated with the specific class. Any rules defined later

will not have any effect.

Ingress Data

The Router can control outgoing data fairly easily. It can queue packets, delay them,

give precedence to other packets, or drop them. This helps in resolving upload (Tx)

traffic bottlenecks, and in most cases is sufficient. However, in the case of download

(Rx) traffic bottlenecks, the ability to control the flow is much more limited. The

Router cannot queue packets, since in most cases the local network (LAN) is much

faster then the Internet (WAN), and when the Router receives a packet from the

Internet, it passes it immediately to the local network.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Actiontec MI424WR in the language / languages: English as an attachment in your email.

The manual is 7,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Actiontec MI424WR Manual

Product: