629196

Actiontec MI424WR Manual

161
Zoom out
Zoom in
Previous page
1/171
Next page
158
Actiontec Wireless Broadband Router User Manual
159
Appendix A Quality of Service
Configure the following parameters:
Name Enter the name of the class in this text box.
Class Priority The class can be granted one of eight priority levels, zero being the
highest and seven the lowest (opposite the rules priority levels). This level sets the
priority of a class in comparison to other classes on the device.
Tx Bandwidth Tx bandwidth is the reserved transmission bandwidth in kilobits
per second. The maximum allowed bandwidth can be limited by selecting Specify
from the drop-down list. The screen will refresh, adding another “Kbits/s” text
box. Enter the desired maximum allowed bandwidth.
Rx Bandwidth In the same manner, Rx bandwidth is the reserved reception
bandwidth, which can also be limited to a maximum allowed bandwidth.
Policy The class policy determines the policy of routing packets inside the class.
Select one of four options:
• Priority - Priority queuing utilizes multiple queues, so that traffic is distrib-
uted among queues based on priority. This priority is defined according to
packet’s priority, which can be defined explicitly, by a DSCP value, or by an
802.1p value.
• FIFO - The “First In, First Out” priority queue. This queue ignores any pre-
viously marked priority the packets may have.
• Fairness - The fairness algorithm ensures no starvation by granting all pack-
ets a certain level of priority.
• RED - The RED (Random Early Detection) algorithm utilizes statistical
methods to drop packets in a “probabilistic” way before queues overflow.
Dropping packets in this way slows a source down enough to keep the queue
steady and reduces the number of packets lost when a queue overflows and a
host is transmitting at a high rate
Schedule By default, the class will always be active. However, scheduler rules can
be configured to define time segments during which the class may be active.
… 161 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Actiontec MI424WR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Actiontec MI424WR in the language / languages: English as an attachment in your email.

The manual is 7,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info