805841

Action 73771 Manual

4
Zoom out
Zoom in
Previous page
1/26
Next page
4
USE
After inserting the plug into the socket,
a “Beep” will sound and the indicator
above the On/off key (6) key will start to
flash. The LED Display (1) will show ‘C’
indicating the appliance is connected
to the power source.
Place suitable cookware on the center
of the cooking zone. Press the On/
off key (6) once, and the LED Display
(1) will show ‘ON’. The indicator above
On/off key (6) will remain lit up. Press
the corresponding function keys to
start operation. Stop the operation and
switch to standby mode by pressing the
On/off key (6) after cooking.
Power level
Press the the function key (2), LED
display (1) will show [1400] represent-
ing that the default power is 1400W. It
can be adjusted by pressing the key (4)
to set the desired power. There are 10
power levels in total (200, 400, 600, 800,
1000, 1200, 1400, 1600, 1800, 2000W).
To cancel this mode, press The func-
tion key (2) to switch to temperature
setting mode or The on/off key (6) to
stop the operation.
Temperature
Press the function key (2) twice, the
displays will show (180°C) representing
that the default temperature is 180°C. It
can be adjusted by pressing the -/+ key
(4) to set the desired power. There are
10 temperature levels: (60, 80, 100, 120,
140, 160, 180, 200, 220, 240). To cancel
this mode, press the function key (2) to
switch to other cooking modes or the
on/off key (6) to turn off.
Timer Function:
The user can set the cooking time
when a specific cooking mode is
selected. Press the timer key (3) once to
access the timer function, the timer (3)
indicator will light up. The LED display
(1) will show the default time (10). The
user can press the -/+ key (4) to set it
to the desired time. The -/+ key (4) can
adjust the minutes by 1. If you hold the
(+) or the (–) key (4) in, the minutes can
be adjusted 10-minute increments. The
time can be adjusted from 1 minute to
240 minutes. After setting the time, the
user can press the timer key (3) once to
confirm or wait until the LED display (1)
stops flashing. After the “Beep” signal,
the appliance will stop the operation
and engage standby mode automati-
cally at the end of the countdown. To
cancel this function, the user can either
press the on/off key (6) to return to
standby mode or hold the timer key (3)
to keep the desired power or tempera-
ture setting.
Child Lock Function:
To prevent children from turning the
cooktop on accidentally or changing
the cooking settings; press the child
lock key (5) for a few seconds. The child
lock (5) indicator will light up. and the
cooktop will not respond to power level,
temperature, or timer changes. You can
press the child lock key (5) either when
the cooktop is operating, or when it’s
turned off.
When the child lock (5) is on, the only
key that will work is the on/off key (6)
button. To disengage the lock, press the
child lock key (5) button for at least 3
seconds, and the light will go out signa-
ling the disengagement of the lock.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Action 73771 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Action 73771 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info