Manual Acronis True Image Echo Server for Windows (page 21 of 120) (English)

624433

Zoom out

Zoom in

1/120

2. The Acronis Universal Restore option does not work if a computer is booted with

Acronis Startup Recovery Manager (using F11) or the backup image is located in Acronis

Secure Zone. This is because Acronis Startup Recovery Manager and Acronis Secure Zone

are primarily meant for instant data recovery on the same computer.

3.6.5 Getting Acronis Universal Restore

Acronis Universal Restore is an add-on to Acronis True Image Echo Server. It is purchased

separately, has its own license, and is installed from a separate setup file.

Let’s assume for a moment that you own Acronis True Image Echo Server but have not

purchased Acronis Universal Restore. When you create a task for restoring a Windows

system disk and select a target disk (either physical or virtual) in the Restore Data Wizard,

the program compares crucial for the system start devices found in the image registry and

the target computer registry. If the chipset, motherboard or mass storage device are

different, and therefore there is a risk that the system cannot boot, you will be prompted

whether you want to buy Acronis Universal Restore. To buy the option, follow the link:

http://www.acronis.com/enterprise/products/AT

ISWin/universal-restore.html

If you already have Acronis Universal Restore, the prompt will not come up and you will

have an option to enable Acronis Universal Restore later in the Restore Data Wizard.

3.7 Backing up to tape drives

Acronis True Image Echo Server supports SCSI tape drives. It can store backups on the

tape and restore data from the tape, store large backups to multiple tapes, and append

incremental/differential changes to a tape with the existing archives.

If a SCSI tape drive is connected to the computer with Acronis True Image Echo Server

the list of devices available for backup storage will be extended with a name

corresponding to the drive type.

Backup and restore on the tape proceed in the same way as with other devices, with the

following exceptions.

1. A full backup can be stored on an empty tape only. If you use tape that already

contains data, its contents will be overwritten.

2. In case you want to keep more than one archive on the tape, for example, back up two

disks separately, choose incremental backup mode instead of a full backup when you

create an initial backup for the second disk. In other situations, incremental backup is

used for appending changes to the previously created archive.

3. You do not have to provide filenames for backups.

You might experience short pauses that are required to rewind the tape.

To enable backup to a locally attached tape device with Acronis True Image Echo Server:

1. Install Acronis True Image Echo Server.

2. Attach the tape device to the computer.

3. If the tape contains data, its contents will be overwritten on prompt. You have an

option to disable prompts, see

5.3.13 Additional settings

4. When creating a backup task, you will be able to select the tape device from the list of

destination devices. Filenames for backups are not needed when backing up to tape.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Acronis True Image Echo Server for Windows in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis True Image Echo Server for Windows

Acronis True Image Echo Server for Windows User Manual - German - 140 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Acronis True Image Echo Server for Windows Manual

Product: