624433

Acronis True Image Echo Server for Windows Manual

19
Zoom out
Zoom in
Previous page
1/120
Next page
19 Copyright © Acronis, Inc., 2000-2009
2. Create the Acronis Secure Zone on the server hard disk (see
Chapter 8. Managing the
Acronis Secure Zone
).
3. Activate Acronis Startup Recovery manager (see
3.4 Acronis Startup Recovery
Manager
) and create bootable media or RIS package with Acronis True Image Echo
Server (see
Chapter 9. Creating bootable
media).
4. Back up (image) the server’s system disk to Acronis Secure Zone (see
5.2 Backing up
disks and partitions (image backup)
). You can back up other disks/partitions as well, but
the system image is mandatory.
When performing Active Restore, the current Acronis True Image Echo Server version
always restores the entire system disk. Therefore, if your system disk consists of several
partitions, all of them must be included in the image. Any partitions which are missing
from the image will be lost.
If failure occurs, boot the server from the bootable media, or RIS server, or using F11.
Start the recovery procedure (see
6.3 Restoring disks/partitions or files from images
),
select the system disk image from Acronis Secure Zone, choose Use Active Restore and
in the next window click Proceed. In a few seconds the computer will reboot to the
restored system. Log in and start work – no additional reboots or other actions are
required.
You can perform Active Restore running Acronis True Image Echo Server in Windows
operating systems as well. However, it is mandatory to have bootable media in case
Windows cannot boot.
3.6 Acronis Universal Restore
3.6.1 Acronis Universal Restore purpose
A system disk image can be deployed easily on the hardware where it was created or to
identical hardware. However, if you change a motherboard or use another processor
version — a likely possibility in case of hardware failure — the restored system could be
unbootable. An attempt to transfer the system to a new, much more powerful computer
will usually produce the same unbootable result because the new hardware is
incompatible with the most critical drivers included in the image.
Using Microsoft System Preparation Tool (Sysprep) does not solve this problem, because
Sysprep permits replacing drivers only for Plug-and-Play devices (sound cards, network
adapters, video cards etc.). As for system Hardware Abstraction Layer (HAL) and mass
storage device drivers, they must be identical on the source and the target computers
(see Microsoft Knowledge Base, articles 302577 and 216915).
Acronis Universal Restore technology provides an efficient solution for hardware-
independent system restoration by replacing the crucial Hardware Abstraction Layer (HAL)
and mass storage device drivers.
Acronis Universal Restore is applicable for:
1. Instant recovery of a failed system on different hardware
2. Hardware-independent cloning and deployment of operating systems
3. Real-to-virtual and virtual-to-real computer migration for system recovery, test and
other purposes.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis True Image Echo Server for Windows at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis True Image Echo Server for Windows in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis True Image Echo Server for Windows

Acronis True Image Echo Server for Windows User Manual - German - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info