Manual Acronis Backup PC 11.7 (page 176 of 248) (English)

624440

176

Zoom out

Zoom in

1/248

9.3.2 Configuring iSCSI and NDAS devices

This section describes how to configure Internet Small Computer System Interface (iSCSI) devices and

Network Direct Attached Storage (NDAS) devices when working under bootable media.

These devices are connected to the machine through a network interface and appear as if they were

locally-attached devices. On the network, an iSCSI device is identified by its IP address, and an NDAS

device is identified by its device ID.

An iSCSI device is sometimes called an iSCSI target. A hardware or software component that provides

interaction between the machine and the iSCSI target is called the iSCSI initiator. The name of the

iSCSI initiator is usually defined by an administrator of the server that hosts the device.

To add an iSCSI device

1. In a bootable media (Linux-based or PE-based), run the management console.

2. Click Configure iSCSI/NDAS devices (in a Linux-based media) or Run the iSCSI Setup (in a

PE-based media).

3. Specify the IP address and port of the iSCSI device's host, and the name of the iSCSI initiator.

4. If the host requires authentication, specify the user name and password for it.

5. Click OK.

6. Select the iSCSI device from the list, and then click Connect.

7. If prompted, specify the user name and password to access the iSCSI device.

To add an NDAS device

1. In a Linux-based bootable media, run the management console.

2. Click Configure iSCSI/NDAS devices.

3. In NDAS devices, click Add device.

4. Specify the 20-character device ID.

5. If you want to allow writing data onto the device, specify the five-character write key. Without

this key, the device will be available in the read-only mode.

6. Click OK.

9.4 List of commands and utilities available in

Linux-based bootable media

Linux-based bootable media contains the following commands and command line utilities, which you

can use when running a command shell. To start the command shell, press CTRL+ALT+F2 while in the

bootable media's management console.

Acronis command-line utilities

 acrocmd

 acronis

 asamba

 lash

Linux commands and utilities

busybox

ifconfig

cat

init

rmmod

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Acronis Backup PC 11.7 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis Backup PC 11.7

Acronis Backup PC 11.7 Installation Guide - English - 16 pages

Acronis Backup PC 11.7 Installation Guide - German - 17 pages

Acronis Backup PC 11.7 User Manual - German - 282 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Acronis Backup PC 11.7 Manual

Product: