624440
174
Zoom out
Zoom in
Previous page
1/248
Next page
174 Copyright © Acronis International GmbH, 2002-2015
Click Add and specify the path to the necessary *.inf file for a corresponding SCSI, RAID, SATA
controller, network adapter, or another device.
Repeat this procedure for each driver you want to be included in the resulting WinPE boot
media.
8. Choose whether you want to create ISO or WIM image or upload the media on a server (Acronis
PXE Server, WDS or RIS).
9. Specify the full path to the resulting image file including the file name, or specify the server and
provide the user name and password to access it.
10. Check your settings in the summary screen and click Proceed.
11. Burn the .ISO to CD or DVD using a third-party tool or copy to a flash drive.
Once a machine boots into WinPE, Acronis Backup starts automatically.
To create a PE image (ISO file) from the resulting WIM file:
replace the default boot.wim file in your Windows PE folder with the newly created WIM file. For
the above example, type:
copy c:\AcronisMedia.wim c:\winpe_x86\ISO\sources\boot.wim
use the Oscdimg tool. For the above example, type:
oscdimg -n bc:\winpe_x86\etfsboot.com c:\winpe_x86\ISO
c:\winpe_x86\winpe_x86.iso
(Do not copy and paste this example. Type the command manually, otherwise it will fail.)
For more information on customizing Windows PE, see the Windows Preinstallation Environment
User’s Guide (Winpe.chm).
9.2 Preparing to work under bootable media
Once a machine boots from bootable media, the machine terminal displays a startup window with
the IP address(es) obtained from DHCP or set according to the pre-configured values. You can change
the network settings before or after starting the work.
To start working, click Manage this machine locally.
Configuring network settings
To change the network settings for a current session, click Configure network in the startup window.
The Network Settings window that appears will allow you to configure network settings for each
network interface card (NIC) of the machine.
Changes made during a session will be lost after the machine reboots.
Adding VLANs
In the Network Settings window, you can add virtual local area networks (VLANs). Use this
functionality if you need access to a backup location that is included in a specific VLAN.
VLANs are mainly used to divide a local area network into segments. A NIC that is connected to an
access port of the switch always has access to the VLAN specified in the port configuration. A NIC
connected to a trunk port of the switch can access the VLANs allowed in the port configuration only if
you specify the VLANs in the network settings.
To enable access to a VLAN via a trunk port
1. Click Add VLAN.
174


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis Backup PC 11.7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis Backup PC 11.7 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis Backup PC 11.7

Acronis Backup PC 11.7 Installation Guide - English - 16 pages

Acronis Backup PC 11.7 Installation Guide - German - 17 pages

Acronis Backup PC 11.7 User Manual - German - 282 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info