660242
13
Zoom out
Zoom in
Previous page
1/69
Next page
10
Programming Multiple Stages
Stage cooking allows consecutive cooking cycles without interruption.
Up to four different cooking cycles can be programmed into a memory
pad.
To use stage cooking:
1. Follow steps 1 through 5 above.
6. Press STAGE.
This will begin programming for the next cooking stage
Display indicates stage to be programmed
Enter cook time and power level as in steps 4 and 5
To enter another cooking stage for that pad, press STAGE
pad again
Up to four different stages can be programmed
Total cooking time (all stages totaled) is 60 minutes
7. Press PROGRAM SAVE to save the programming and changes.
8. To discard changes, press STOP/RESET before pressing
PROGRAM SAVE.
Programming Pads
Oven is shipped from the factory set for single pad programming. To
change the oven default to double pad programming, see User Option
section. To program the amount of time or power level setting for a pad:
1. READY must be in the display. If not, open and close door.
2. Press PROGRAM SAVE pad.
Programming mode begins
“Enter Program to Add/Review” displays
3. Press desired number pad to be programmed.
Display will show all settings for the pad
The pad number that is being programmed displays beside
the word ITEM
4. Press TIME ENTRY to program amount of cooking time.
Enter desired cooking time by using numeric key pads
Maximum cooking time is 60 minutes
5. Press POWER LEVEL to program level of microwave power.
For a lower microwave power, press pads 1 (for 10%)
through 9 (for 90%)
Press numeric key pad for desired level. Press same
numeric key pad again to set power level to 100% .
6. Press PROGRAM SAVE to save changes.
7. To discard changes, press STOP/RESET.
Programming Oven Controls
0
1
2
3
4
Programming Top &
Bottom Only Cooking
1. Push the POWER LEVEL pad.
Select and program the
preferred microwave power.
2. If the POWER LEVEL pad is
pushed a second time, “Top Only”
heating option will be selected and
displayed.
3. If the POWER LEVEL pad is
pushed a third time, “Bottom Only”
heating is selected and displayed.
4. If the POWER LEVEL button is
pushed a fourth time, the oven
resets and both top and bottom will
heat.
MW: 50%
Manual Stage: 1
00:00
MW: 50%
Manual Stage: 1
00:00
Top Only Cooking
Bottom Only Cooking
Manual
00:50
Stage: 1
MW: 100%
Top and Bottom Cooking
Flashing
Flashing
Flashing
Part No. 20152601
Printed in U.S.A. 8/15
Original Instructions
2015 ACP, Inc.
Cedar Rapids, Iowa 52404
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACP MSO5211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACP MSO5211 in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP MSO5211

ACP MSO5211 User Manual - German - 14 pages

ACP MSO5211 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info