660242
12
Zoom out
Zoom in
Previous page
1/69
Next page
9
Microwave cooking uses high
frequency energy waves to heat the
food. When cooking, microwave
energy causes food molecules to
move rapidly. This rapid movement
between the food molecules creates
heat, which cooks the food.
Manual Time Entry
To cook food using a specic time and power level.
1. Open oven door and place food in oven. Close door.
READY displays. Fan and light will turn on.
2. Press TIME ENTRY pad.
If pad does not work, open and close oven door and try
again.
3. Enter cooking time by using the numbered keypads.
4. Press POWER LEVEL pad to change power level.
To change the microwave’s power, press pads 1 (for
10%) through 9 (for 90%).
5. If stage cooking is desired, press STAGE and repeat steps
2 through 4.
Up to four different stages can be programmed.
6. Press START pad.
Oven operates and time counts down.
7. At end of cooking cycle oven beeps and shuts off.
DONE displays.
Preprogrammed Pads
Cooking food using preprogrammed keypads.
For instructions on programming keypads, see page 10 of the Programming
Oven Controls section of this manual.
1. Open oven door and place food in oven. Close
door.
READY displays. Fan and light will turn on.
2. Press desired pad.
For single pad entry, press only one pad.
For double pad entry, press the two pads representing the two digits.
To change single or double pad entry option
see User Options section in this manual.
3. When cooking two of the same food item, press the QUANTITY pad
before a preprogrammed cook cycle. The oven will automatically adjust
the program.
Display will read, “DOUBLE.”
To clear, open and close the door or press the STOP pad
3. Oven begins to cook.
For additional cooking time, press preprogrammed number pad again.
4. At the end of the cooking cycle oven beeps and shuts off. DONE displays.
Factory Settings
Using the Oven Controls
Microwave Cooking
0
1
2
3
4
1
Running a microwave without a
load can cause serious damage to
electrical components. When food
is placed in the oven, microwave
energy generated by the magnetron
is absorbed by the food. When
no food is in the oven, there is
nothing to absorb the energy. The
energy bounces around the cavity
and is channeled back through
the waveguide. This can cause
arcing, re and may burn out the
magnetron.
Is it safe to run a
microwave if it is empty?
How do you defrost
food while using a
commercial microwave?
How do you know if a
container is microwave
safe?
Not all commercial microwaves have
the defrost button that is commonly
found on a residential microwave. To
defrost, simply use 20% microwave
power level.
To test if a container is microwave
safe, place it in the microwave next
to a container of water that is micro-
wave safe. Run the microwave for
one minute. If the tested container
is warm or hot, it is not microwave
safe.
X2
Part No. 20152601
Printed in U.S.A. 8/15
Original Instructions
2015 ACP, Inc.
Cedar Rapids, Iowa 52404
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACP MSO5211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACP MSO5211 in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACP MSO5211

ACP MSO5211 User Manual - German - 14 pages

ACP MSO5211 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info