676711
7
Zoom out
Zoom in
Previous page
1/12
Next page
If you connect an Android, Windows Mobile or Blackberry device, the volume control
will adjust when changed on the connected device but the volume cannot be raised
past the point where it has been set by the volume buttons on the top panel. If you
are routinely using a device that uses these operating systems, it will make sense to
raise the volume on the BT2 to its maximum setting and then use the volume on the
connected device to set the listening level.
BLUETOOTH
The Bluetooth button will place the BT2 in pairing mode, ready to connect to a
Bluetooth device. If you are turning the BT2 on for the rst time, or since you have
reset the speaker, it will automatically go into pairing mode and become visible to
Bluetooth devices around it. If a device you have previously connected to is present,
the BT2 will automatically try and pair with that. If you wish to disconnect the BT2
and connect a new device, press and hold the Bluetooth button for three seconds
(the blue pairing light will ash). This will end the connection between the two
devices and allow you to connect a new device to the BT2. Holding the Bluetooth
button for longer than four seconds will reset all the Bluetooth connections.
STATUS LIGHTS
The BT2 has two lights that indicate the status of the unit and convey useful information.
The top light beneath the power button is the power status indicator. This will shine
a solid white colour when the BT2 is powered on and running on mains or with a
battery reserve of over 20%. If the battery level is below 20%, the light will turn red
(and the Charge Out socket will be disabled). If power drops below 5% the red light
will start to ash.
The lower light shows the status of the BT2. If the Bluetooth input is selected but not
connected, the light will ash blue. Once a connection has been made, the light will
go a solid blue. When the aux input is selected, the light will turn green.
7
8
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustic energy BT2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustic energy BT2 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info