676711
5
Zoom out
Zoom in
Previous page
1/12
Next page
REAR PANEL CONNECTIONS
AUX IN
As well as connecting to Bluetooth equipped devices, the BT2 can be used with
any device that has a line level audio output such as an older MP3 player, television
or PC. A 3.5mm - 3.5mm jack cable is supplied with the BT2 for this purpose but any
analogue stereo connection can be used to supply a signal to the BT2 provided
that you have a cable that terminates in a 3.5mm connection.
Aux is selected by the BT2 automatically when the 3.5mm connector is inserted; the
lower status light will switch from blue to green to indicate the aux input is active.
To manually switch back to Bluetooth simply press and release the Bluetooth button
or disconnect the aux lead. To switch back to aux press and release the power button.
RESET
The reset button will return your BT2 to the condition it was in when it was rst
unpacked from the box. All previous paired devices will be forgotten as will any
pairing with another BT2 speaker for stereo playback. The reset button has been
deliberately recessed to avoid accidental depression. An object like an unbent
paperclip will be able to reach the button and once pressed for a few seconds,
the BT2 will reset. Bluetooth connections can be fully reset by depressing the
Bluetooth button for four seconds until there is an audible beep.
CHARGE OUT
This is a USB-A connection that will provide a charge for a phone or tablet connected
to it. The charge out will work with the BT2 running from mains and running from
battery power if the charge level on the BT2 is over 20%. Once charge dips below this
level, the output will be disabled to keep the BT2 running for as long as possible.
1
2
3
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acoustic energy BT2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acoustic energy BT2 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info