755219
41
Zoom out
Zoom in
Previous page
1/82
Next page
19
UK
10.4 After an alarm
10.4.1 Switching off the sirens
Every partition can issue an alarm, independent of the
other partitions. But not all users have access to all
partitions. However, the system allows all users to switch
off the sirens after an alarm.
The system shows an alarm in Partition A.
1. Enter your user code. The sirens are switched off. The
display shows the partitions that you can access.
2. Press the corresponding button to deactivate the
required partition. Press .
10.4.2 Resetting the system
A partitioned system uses the same reset methods as a
single system However, there are a few differences:
1. User reset
Enter the user code or hold a proximity code key at the
control unit. The display shows the partitions you can
access.
2. Press . The display shows a 4-digit reset code.
3. Carry out a remote reset as described in the installation
instructions.
10.5 Blocking zones
The method used for blocking zones within the partitioned
system has changed. Zones can no longer be blocked as
long as the system is active.
1. Enter your access code (or proximity code key), and
press .
The display shows:
2. Enter the number of the zone you want to block.
If you are not authorized to block this zone, the display
shows:
If you are authorized to block a zone then the following is
shown:
If you have blocked an immediate alarm zone then the
next time the system is activated, you are prompted to
confirm the zone block. Press , and the alarm centre
begins to activate the blocked zone. During the next
deactivation, the blocking of the zone is once more
deactivated.
A blocked 24-hour zone must be manually unblocked via
the control unit:
1. Enter the user code (or proximity code key)
2. Press followed by the number of the zone and
.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Terxon SX - AZ4111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Terxon SX - AZ4111 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus Terxon SX - AZ4111

Abus Terxon SX - AZ4111 Installation Guide - English, German, Dutch, Danish, French - 484 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info