756351
38
Zoom out
Zoom in
Previous page
1/74
Next page
Setting: Configuration
38
Parameter Setting
Alarm output Select the alarm output to adjust the
settings. You can select the alarm
output for a network camera using
the network address data.
Alarm name Enter a clear description, e.g.
warehouse door contact
Dwell Time Select the dwell time for switching
the alarm output.
Settings Define the linkage action.
Activate the alarm output by ticking the "Settings"
box.
Define the schedule for the recorder alarm output in
the event of an alarm under "Settings".
Linkage action
The “Linkage action” menu is the recorder’s central event
control function. From here, event-based recording, time
schedules, emails, acoustic warnings, CMS notifications
and PTZ actions can be programmed.
Linkage actions are available in various menus on the
recorder (e.g.: alarm, motion detection, VCA).
Trigger channel tab
Tick the corresponding box to select which camera
channel is triggered in the event of an alarm.
Arming Schedule tab
Set the time at which the responses selected on the
“Linkage Action” tab are activated when there is an
alarm.
Click on “Copy” to apply these settings to other days
of the week or the entire week.
Note
If not further defined, use this section as a
reference for the configuration of Linkage Action
and as a substitution for all relevant menus in the
recorder.
Parameter Setting
Trigger
channel
Select which camera should be
triggered in case of an alarm/incident.
A trigger signal normally causes an
alarm recording.
Arming
schedule
If you wish, you can decide whether
the schedule of a camera should be
activated in the event of an incident.
This setting is only practical if the time
schedule of a camera was explicitly
deactivated beforehand (see
“Recordings menu). Normally, the
time schedule of a camera is always
enabled.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus nvr10010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus nvr10010 in the language / languages: English as an attachment in your email.

The manual is 14,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus nvr10010

Abus nvr10010 User Manual - German - 75 pages

Abus nvr10010 User Manual - Dutch - 74 pages

Abus nvr10010 User Manual - Danish - 74 pages

Abus nvr10010 User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info