756351
37
Zoom out
Zoom in
Previous page
1/74
Next page
Setting: Configuration
37
Alarm
Configure the behaviour of the recorder’s physical and
virtual alarm inputs and outputs in the alarm menu.
Alarm Status tab
Here you can see a list of all the alarm inputs and outputs
and their current status.
Alarm Input tab
Configuration of individual alarm inputs
Parameter Setting
Alarm input Select the alarm input to adjust the
settings. You can select the alarm
input for an IP camera using the
network address data.
Alarm Name Enter a clear description, e.g.
warehouse door contact.
Type N.O.: normally open circuit
N.C.: normally closed circuit
Arming Activates/deactivates the selected
alarm input.
Settings Define the linkage action.
Activate the alarm input by ticking the “Activate” box.
Define the response of the recorder in the event of an
alarm under "Settings".
Click on Copy to apply these settings to other alarm
inputs.
Confirm the settings by clicking on Apply and exit the
menu by clicking on Back.
Further settings for the programming of an action/time
schedule for alarm inputs and outputs are described in
the “Linkage Action section.
Alarm output tab
Configuration of individual alarm outputs
Alarm input Setting
Localxx Shows the status of alarm input “xx”.
The numbering “xx” corresponds to
the numbering of the physical alarm
inputs (1–16).
192.168.1.5:80
00 xx
Shows the status of the alarm input
for IP address 192.168.1.5 “xx”. The
numbering “xx” corresponds to the
numbering of the camera’s physical
alarm inputs (1–8).
Alarm name Name (if assigned) of the alarm input.
Alarm type N.O.: normally open circuit
N.C.: normally closed circuit
Alarm output Setting
Local xx Shows the status of alarm output “xx”.
The numbering “xx” corresponds to
the numbering of the physical alarm
outputs (1–8).
192.168.1.5:80
00 xx
Shows the status of the alarm output
for IP address 192.168.1.5 “xx”. The
numbering “xx” corresponds to the
numbering of the camera’s physical
alarm outputs (1–4).
Alarm name Name (if assigned) of the alarm
output.
Dwell Time States how long (in seconds) the
relay is closed when activated.
Copy
Linkage action
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus nvr10010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus nvr10010 in the language / languages: English as an attachment in your email.

The manual is 14,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus nvr10010

Abus nvr10010 User Manual - German - 75 pages

Abus nvr10010 User Manual - Dutch - 74 pages

Abus nvr10010 User Manual - Danish - 74 pages

Abus nvr10010 User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info