Manual Abus FUSG50010 - Secvest (page 12 of 48) (English, German, Dutch, Danish, French, Italian)

692207

Zoom out

Zoom in

1/48

plate.

Interior view

1. Jumper connections for selecting the partition, learning in

the alarm centre, defining the emitted tones and adjusting

the alarm tone volume

2. Screw terminal block for 4.5 and 12 V connections

3. Screw terminal block for internal piezo signaller

4. Wireless reception module

5. LED

6. Piezo signaller

Attaching the rear housing wall

1. Using the base plate as a drilling template, mark the drill

holes on the wall. Drill the holes and insert wall plugs if

necessary.

2. Feed the connection cable of the PSU into the device and

screw the rear housing side onto the wall (optional).

3. Supply the internal siren with power (either 4.5 V or 12 V,

or both - the polarity of the terminal block is printed on the

PCB).

Assigning the Secvest to the wireless internal siren

1. Set the “LEARN” jumper. LED1 starts to flash. Learning

mode is now active.

2. In the installer menu of the wireless alarm centre, select

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus FUSG50010 - Secvest in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus FUSG50010 - Secvest Manual

Product: