756184

Abus fusg50000 Manual

8
Zoom out
Zoom in
Previous page
1/29
Next page
8
Settings on the siren
Jamming
The siren monitors jamming independently, but does not activate itself if jamming occurs.
Jumper inserted: Jamming on – The siren informs the control unit (default setting)
Jumper removed: Jamming off – No action
Self-set under tampering (SAB mode)
Jumper inserted: SAB on – Self-set of the siren when tamper contact is open – information sent to the
control unit. The siren switches off when the tamper contact is closed again or a response
is received from the control unit (default setting).
Jumper removed: SAB off – No self-set when tamper contact is open, but the control unit is still informed.
Depending on the settings, the control unit then gives the order for siren set (or not).
Siren unset period: The acoustic siren switches off after the defined unset period or when a unset command is
received from the control unit. The unset period changes according to the jumper position.
Jumper removed: 5 sec.
Jumper inserted to the left: 3 min.
Jumper inserted to the right: 15 min. (default setting)
These settings do not affect the flashing LED. This switches off after 15 minutes, at the latest.
Positioning of the flashing LED bar
The flashing LED bar can be attached on the top or bottom inside the siren.
To reposition the flashing bar, first loosen the battery connections. Bend the holder clamps outwards and lift out the
flashing bar. Pay attention to cable guidance of the flashing bar in the base plate and reattach the bar into the new
position. Ensure that it is latched into place completely. Reattach the battery and close the housing. Make sure that the
lens is aligned correctly.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus fusg50000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus fusg50000 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info