756181

Abus fumo50020 Manual

47
Zoom out
Zoom in
Previous page
1/187
Next page
43
Close both tamper contacts of the WAM and wait until it emits
a double tone.
4. Connect the outputs with their switch contacts accordingly. Note
that the switching power of the relay is max. 500 mA at 12 V DC!
In the default setting, the relay contact works as a NO contact.
After completing all connections, close the accessory module.
If an output is activated, the LED of the output lights as long as the
output is active. This function is only active if the accessory module
is supplied with 12 V DC power.
6.3.3 Wireless transmitter/receiver
Function 3 / LED 3 (only in combination with the Secvest)
When used as a wireless transmitter or receiver, the accessory
module has four relay outputs and two alarm inputs. Alarm input 1
is used for connecting an alarm contact for external detectors.
Alarm input 2 is used for connecting a tamper line. The accessory
module can only carry out this function in combination with the
wireless alarm system. Up to eight accessory modules can be
operated as wireless transmitters/receivers with the Secvest.
This function works in the same way as function 2 (see “Wireless
output module” above). However, both inputs are additionally
active on the accessory module. To use the accessory module as
a wireless transmitter/receiver, proceed as follows:
1. In the main programming menu, select item 7 (Function).
LED 7 lights up.
Confirm by pressing SET.
In the submenu of item 7 (Function), select function 3 with
the SELECT button. LED 3 lights up.
Confirm by pressing SET. LED 7 lights up again.
Set dip switch 3 of the accessory module to ON.
Exit the programming mode by pressing ESC/DEL.
The LED for the power supply lights up/flashes and the fault
LED lights up. The accessory module beeps at short intervals.
Close both tamper contacts of the WAM and wait until it emits
a double tone.
2. On the wireless alarm system, select “Add Other
Devices/Wireless Accessory Module” and follow the installation
instructions for the alarm system. When prompted, trigger the
tamper contact of the accessory module and wait until the
wireless alarm system receives the signal from the accessory
module.
The accessory module is now trained as a wireless
transmitter/receiver.
The outputs behave in the same way as the wireless output
module (see 7.3.2).
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus fumo50020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus fumo50020 in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info