Manual Abus fumk50031w (page 21 of 68) (English, German, Dutch, Danish, French, Italian)

755916

Zoom out

Zoom in

1/68

Installation

21 | EN

Step 4: Power supply

 Insert the batteries into the bracket, ensuring the polarity is correct.

Step 5: Program detector into alarm panel or receiver component

Note

The following describes direct programming on the Secvest alarm panel

FUAA50000. For web-based programming and programming to other receivers,

please read the relevant chapter in the instructions about these components.

 If this has not been done already, switch the alarm panel on.

 Select:

Installer mode -> Components -> Detector -> Wireless zones -> Add/Remove detector

 Choose a free wireless zone. The message ‘Activate the tamper contact of the detector’ is

displayed.

 Flick the tampering switch.

The detector will then send a pairing signal to the alarm panel. The alarm panel will recog-

nise the detector.

 Once the pairing signal has been received by the wireless alarm system, it will emit two

beeps. The message ‘Detector was programmed to: zone 2xy’ and the incoming signal

strength are displayed.

 Confirm the successfully completed pairing on the control panel.

Step 6: Test the system

 Test the system fully.

Signal strength

Installer mode > Test > Signal strengths > Detector

After selecting the signal strengths for all detectors is displayed on the alarm panel. For more de-

tails, please refer to the relevant instructions for the alarm panel or wireless extension.

Walk test

Installer mode > Test > Walk test

After making the selection, you can choose whether to test all detectors in the system, in a parti-

tion of the system, or individual detectors. For more details, please refer to the relevant instructions

for the alarm panel or wireless extension.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus fumk50031w in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus fumk50031w Manual

Product: