755916

Abus fumk50031w Manual

22
Zoom out
Zoom in
Previous page
1/68
Next page
Functions and displays
22 | EN
Flick the tampering switch.
The message ‘S’ for tamper is displayed.
Open the door or the window.
The message ‘A’ for alarm is displayed.
Step 7: Close the cover of the sensor and the magnet
Close the sensor cover and re-tighten the screw on the underside of the sensor.
Close the magnet cover. The upper part of the magnet cover must be clicked into place on
the bottom part.
Step 8: Programming the alarm panel
Adjust zone type and attributes according to the requirements.
Exit installer mode on the alarm panel. The system is now ready.
Functions and displays
Operation of the LEDs
Note
Remove the jumper to disarm the front LED.
Enable LED
to enable programming via infrared. Some products are programmed via infrared (not
via wireless).
to check detector function on site.
Disable LED
to increase security
to extend battery life.
Error and tamper monitoring
The detector continually monitors error and tamper states and reports all events to the alarm
panel. The following is monitored:
Tamper contact: The detector’s tamper contact is continually monitored.
Battery voltage: The detector monitors the battery voltage and reports faults to the alarm
panel.
Supervision: The detector continually sends Supervision messages to the alarm panel.
Maintenance
Danger
Before opening the sensor cover, make sure that the alarm panel is in installer
mode. This prevents the tamper alarm from being triggered.
Test during routine maintenance that the detector works properly.
Check the tamper contact.
Check the functionality of the detector by opening and closing the door or the window.
Clean the detector as required.
Replace the batteries every two years or if the alarm panel displays the message ‘Flat battery in
detector’. You can find the battery type to be used as a replacement under Technical data.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus fumk50031w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus fumk50031w in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info