Manual Abus FU9035 (page 6 of 12) (English, German, Dutch, French)

580000

Zoom out

Zoom in

1/12

Test with a test gas

Before testing the detector, switch your alarm centre

to installer mode or omit the smoke detector. You

should check the smoke detector at least once a year

with the help of a test gas. The test gas simulates

smoke particles. This accessory allows you to test

whether your optical smoke detector works or not. If

the detector senses the gas, the LED light and the

siren reports an alarm. The alarm ends when the

test gas has dispersed. Following a successful test,

reintegrate the detector and exit installer mode.

Test button

The test button has two functions:

1. Test: Press the button and keep it pressed for 2

seconds. This checks the functioning of the siren.

2. Silence the detector siren: To switch off the detec

tor siren, press the test button during an alarm. If

the detector chamber still contains smoke after a

few minutes, the siren sounds again.

LED

The LED shows the status of the radio smoke detec-

tor.Itnormallyashesevery35seconds.

LED on: Smoke detected.

Battery change

The smoke detector needs two 3V lithium batteries.

These batteries are available in every electrical

goods shop. Do not use other batteries. Replace the

batteries once a year or immediately when the low

battery „beep“ signal sound once in 35 seconds. The

low battery beep should last at least 30 days before

the battery dies completely. To change the battery,

remove the detector from its base. Open the battery

housingandchangethebatteries.Thenxthesmo

ke detector to the ceiling again.

Cleaning the smoke chamber

Clean the housing with a dry or damp cloth to

remove dust and dirt. If necessary, open the smoke

chamber and clean the interior of the detector.

1. Remove the detector from the detector base.

2. Remove the batteries.

3.Insertaatscrewdriverinthegapandliftthe

smoke chamber housing slightly.

4.Useanepaintbrushtoremovedirtfromthechamber.

5.Aftercleaning,closethesmokechamber,xthe

housing and remount the detector on the ceiling.

Do not forget to replace the batteries.

Technical data

Frequency 868.65 MHz

RF immunity 20V/m 80MHz – 1GHz

Modulation AM

Power consumption max. 55 mA alarm

Battery 2xCR123 3V Lithium

Battery lifetime ca. 1 year

Low battery under 5.6 V

Signalling equipment 85 dB at 3.3 m

Operating temperature 4°C – 38°C

Ambient operating

humidity

10-85 % non-conden-

sing or icing

Weight 335g

Dimensions Detector

(ØxH)

148 x 53 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus FU9035 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus FU9035 Manual

Product: