554031
90
Zoom out
Zoom in
Previous page
1/96
Next page
11-90
11.2.3 Programming zones
You do not have to program the zones for the detectors in your package. They are already programmed for you as follows:
No. Zone name Zone type Detector type Partition Message
1 Zone 1 Entry(o)Exit (30sec/30sec) Wireless opening contact detector 1 Entrance door
2 Zone 2 Instant Wireless motion sensor 1 Living room
3 Zone 3 Fire Wireless smoke detector 1 Bedroom
With this program, the
wireless opening detector starts an entry delay of 30 seconds in which your ABUS wireless alarm
system
has to be deactivated if it is active. Additionally, you have 30 seconds to leave the object after activating it on the
keypad.
The
wireless motion sensor is monitored only if the system is completely active. In an internally activated state, the wireless
motion sensor is not monitored so that you can move freely within your object.
The
wireless smoke detector is always active.
If you have bought other detectors, you have to program them now. See the instructions for further information.
11.2.4 Allocate key-fobs
The key-fob has 4 buttons. To allocate the key-fob:
Press
77
.
You are in the key-fob menu option.
Press
twice. Press
22
followed by .
The system waits for a signal from the remote control.
Press the arm key (closed padlock) and keep it pressed until the system receives the message.
The system acknowledges this with a long beep.
Press
twice to complete the process. You see the following in the display:
11.2.5 Programming the key fob
You do not have to program the buttons of your remote control. They are already programmed for you as follows:
Button Function
Active (closed padlock) Arm
Inactive (open padlock) Disarm
Small button Panic
Large button Internal arm
If you have bought other remote controls for your package, you have to program them now. See the instructions for further information.
11.3 Enabling voice text transmission by telephone
The telephone transmission function is disabled in the factory since it causes problems if no telephone line is connected. If you want to
transmit voice text by telephone, do the following:
Press
55
.
You are in the Dialer menu option.
Press
66
followed by
0202
. Change the setting from [N] to [Y]. Press once. The display changes to [Y].
Press
to save your input.
Press
twice to complete the process. You see the following in the display:
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus FU9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus FU9000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus FU9000

Abus FU9000 User Manual - English - 56 pages

Abus FU9000 Installation Guide - German - 96 pages

Abus FU9000 User Manual - German - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info