643674

Abus AZWG10000 GSM-Interface Manual

41
Zoom out
Zoom in
Previous page
1/118
Next page
41
AZWG10000
10.1 GSM software
Using the GSM programming software, you can choose between two transmission
media:
- Locally: Using the accompanying USB programming cable (standard).
- Remote access: Remote programming over the GSM data channel of the
SIM card with a standard modem.
IMPORTANT:
You will find the installation and programming instructions for the GSM software on
the accompanying CD!
10.2 SMS
10.2.1 General
You can program the GSM-Interface with SMS commands on any standard mobile
phone. You need a four-digit installer code (default: 0200).
IMPORTANT:
With the commands specified here, you can make the same settings as with the
GSM software. For further information on the commands, see the Help screen of
the GSM software on the accompanying CD.
10.2.1.1 Sending a single command
“Installer code” “4-digit SMS command” “=” “data”
Example:
Setting the user code
Installer code = 0200; command = PWFM; new code = 4444.
0200PWFM=4444
10.2.1.2 Sending a single command with more data
Use a comma to separate the data of the command.
Example:
Setting events for contact 1
Installer code = 0200; command = F1RE; events = 1 (entrance 1), 5 (tamper), 8 (AC
power missing).
0200F1RE=1,5,8
10.2.1.3 Sending several SMS commands simultaneously
You can enter several commands in one message.
Use a colon (“:”) to separate the commands.
“Installer code” “4-digit SMS command 1” “=” “data 1” “:” 4-digit SMS command 2”
“=” “data 2” “:”
Example:
Defining the user code and setting of events for contact 1.
Installer code = 0200; command 1 = PWFM; new code = 4444; command 2 = FIRE;
events = 1
0200PWFM=4444:F1RE=1
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus AZWG10000 GSM-Interface at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus AZWG10000 GSM-Interface in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info