5
Preparing Micro Rolltalk
You will need to perform the following start-up routine before using the Micro Rolltalk
unit for the first time, or if you have deleted the memory (i.e. after a hard reset).
If you do not need to use finger guides, simply use the cover with an opening for the
entire screen. This is important for covering the buttons on the front of the Micro
Rolltalk unit.
The bag for Micro Rolltalk is also adapted for finger guides, and it will not fit properly
unless a finger guide is used.
1. If you want to use the SMS functions in Rolltalk Designer, start by inserting a
SIM card; if not, proceed to the next section. Position the SIM card under the
battery. Open the back cover by pressing it upwards.
2. Insert the battery (1). Connect the charger and charge the battery before use.
Fully charge Micro Rolltalk.
3. Switch on Micro Rolltalk by pressing the on/off button in the top right-hand
corner (4).
4. Adjust the date and time on the Micro Rolltalk, it is important to set the time
correctly to ensure that the user can keep appointments, etc.
Select Start|Settings|Clock & Alarms.
Select the time zone – “GMT +1 Berlin, Rome” for example.
Set the time by marking the figures and then using the up or down arrows.
Select the correct date from the drop-down menu.
Select OK in the lower right corner.. When the information “Save settings to
Clock settings” appears, select YES.
5. If the phone functionality shall be used, the phone needs to be activated.
Select Start|Settings|Connections|Wireless Manager.
Select On, and then press the X in the lower right corner.
The Micro Rolltalk unit is now ready for you to install Rolltalk Designer.