4
Micro Rolltalk functions and buttons
1. Battery - To remove the battery cover, open the back cover by pressing it
upwards. Insert the battery and replace the cover.
2. Reset - To perform a “Soft reset”, insert a pen into the reset hole (2). A Soft reset
stops the program that is running and then restarts the machine. Stored programs
will not be lost. For information about “Hard resets”, see page 31.
3. Charging and connection to PC
a) Charging: Insert the USB plug from the charger, and connect the mains plug
to a power socket. The unit will display an orange light during charging.
b) Connection to PC: use the USB cable supplied to connect the unit to a PC
and transfer programs to Micro Rolltalk. Remember to perform a Soft reset
page 26 on Micro Rolltalk after transferring programs. Using the USB cable
to connect Micro Rolltalk to a PC will also charge the unit, but this type of
charging takes longer.
4. Microphone - Used for speaking into the Voice Recorder.
5. Sleep mode - A light touch will put Micro Rolltalk in hibernation mode. It is not
possible to turn the unit off completely.
6. Volume control - Turn the dial to the right to increase volume and to the left to
reduce it.
See the speech synthesis and volume tips on page 26.
7. Earpieces - The earpieces supplied in the package can be connected to 3,5 mm
jack