677231

Abilia 808620 - IR-LIFT MAXI Manual

26
Zoom out
Zoom in
Previous page
1/32
Next page
26 (32)
1 0
1 0
2
6
1
4 5
3
3. Select floor by using button
1
(step upwards) and button
4
(step
downwards).
4. Press
*
when the wanted floor has been selected.
_
_
is shown on the
display.
5. Select GewaLink channel by choosing a number
between 000-127, write channel 1 as 001 and
channel 32 as 032 for instance. Selected floor is
shown with one dot in every corner.
6. Proceed to point 3 if several floors are to be
controlled directly or complete with
.
O
K
is now shown on the display.
7. Complete the programming by pressing
0
0
or proceed and program other
functions.
Quick Guide
Programming direct control by GewaLink channel:
0
7
, select floor, confirm
with
*
,
select channel
etc. Complete with
Programming Direct Control by coded channel
This function can be used to directly control (without scanning) to a selected
floor by a coded channel (4096). Only the person who has access to the correct
code can reach the selected floor. To be able to enter this function “Channel set
scanning” must be programmed. See section “Programming the Scanning
Method”. It is not possible to enter the same code on more than one floor. Note!
Write down the code for future use.
Proceed as follows to enter a coded channel:
1. Enter programming mode if this has not been made, see specific section.
P
is
now shown on the display.
2. Direct the transmitter towards the lift indicator and press
0
5
. The bottom
floor is now shown on the display.
3. Select floor by using button
1
(step upwards) and
button
4
(step downwards).
4. Press
*
when the correct floor has been selected.
_
_
is shown on the display.
5. Select code by choosing a number between 0000-4095,
write channel 1 as 001 and channel 32 as 032 for
instance. Selected floor is shown with two dots in
every corner.
6. Proceed to point 3 if several floors are to be coded
or complete with
#
.
O
K
is now shown on the
display.
7. Complete the programming by pressing
0
0
or proceed and program other
functions.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 808620 - IR-LIFT MAXI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 808620 - IR-LIFT MAXI in the language / languages: English, Swedish as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info