Manual Abilia 429220 Gewa Control Medi Standard (page 31 of 44) (English, Swedish)

677193

Zoom out

Zoom in

1/44

2.8 Adding a 4096-code

Control Medi is delivered with a special coded channel (4096) on the Code button

. The

code is selected randomly. This coded channel is normally used for functions that require

strict authorization such as apartment or house doors. The code has 4096 different

combinations.

The Code button always has the same code irrespective of which level you use. If you have

to program a new coded channel there are two methods of doing so. You can set the 4096

code on any level and button. It is recommended to keep the 4096 code on the Code

button.

NOTE! When you add a new coded channel it is added to just one level. If you want to use

the Code button with the same code on several levels, you must add it to each level.

Method one: record the code from another transmitter, as described under Recording IR

channels from another Transmitter.

For method two a binary code is entered. Make up the binary code yourself or else use a

code that is already set in an IR receiver or IR transmitter.

There are two types of IR receivers: an older type of receiver where you set the code with a

12-pole switch, or a newer type where the IR receiver is programmable. The principle is the

same when it comes to creating the binary code. Fig 3 shows a 12-pole switch. Switches 1,

4, 6 and 12 are in the “On” position, the others are in the “Off” position.

1 2 3 4 5 6 7 8 9 10 11 12

2048 1024 512 256 128 64 32 16 8 4 2 1

Off

Fig 3

The following example describes how the binary code is created according to method two:

1. First press

---

and then simultaneously press

for 2 seconds. When you release the

buttons the “Setting” alert sounds and the indication lamp on button 1 flashes.

2. Press

and then press

again.

3. Select the level where the 4096 code is to be set with

---

4. Select the button where the 4096 code should be saved. (Button

is recommended.)

5. Enter the code by pressing on

= switch in Off position and

= switch in On position.

Press twelve times in turn;

, (Fig 3).

6. If the action is successful, the “Success” alert sounds. If something goes wrong or takes

too long, the “Error” alert sounds.

7. The code is now set on your selected button. NOTE! The code above is just an example

and should be different for different users. Make a note of the chosen code for future

usage.

NOTE! If you have added a coded channel to the Code button and you want to use the

Code button with the same code on several levels, you must add it to each level individually.

Adding a 4096 code

Press

---

2 sec

, choose the level with

---

, choose the button

, then press

12 times.

= Off position.

= On position.

Default setting: Random code

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 429220 Gewa Control Medi Standard in the language / languages: English, Swedish as an attachment in your email.

The manual is 1,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abilia 429220 Gewa Control Medi Standard

Abilia 429220 Gewa Control Medi Standard User Manual - German, French - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abilia 429220 Gewa Control Medi Standard Manual

Product: