677193
29
Zoom out
Zoom in
Previous page
1/44
Next page
29
2.6 Recording IR Channels from another Transmitter
Make sure the batteries in both transmitters are fully charged. Do not use the transmitters in
intense light (e.g., sunlight) when programming.
Place the two transmitters on a table with the original transmitter directed towards the rear
of your Control Medi, see picture.
1. First
---
and then simultaneously press
1
for 2 seconds. When
you release the buttons the “Setting” alert sounds and the
indication lamp on button 1 flashes.
2. Press
1
.
3. Choose the level where the channels are to be recorded with
---
.
4. Press the button
X
where the channel is to be recorded. The
indicator light for the selected button glows steadily and the
“Press” alert sounds.
5. Press and hold the corresponding button
Y
on the original
transmitter pressed. Release the button when the indicator light
for the selected button goes off and the “Release” alert sounds.
This may take up to 10 seconds. If the indicator light glows again
and the “Press” alert sounds, you should press the button one or
more times until the “Success” alert sounds.
If the “Error” alert sounds, the recording has failed. Try again
from step 4.
6. If the recording of the first button was successful, repeat steps 4
and 5 until all buttons are programmed.
7. Finish by pressing
---
for 2 seconds.
8. If the action is successful, the “Success” alert sounds. If
something goes wrong or takes too long, the “Error” alert sounds.
9. Now test your recorded functions on the device that is to be
controlled.
Recording IR Channels
Press
---
+
1
2 sec
,
1
, choose the level with
---
, select button
X
, select button
Y
,
then continue or finish with
---
2 sec
Important! When just one level is used, the Level button automatically becomes the next
levels first button, see Table 1. It means that it is possible to record an IR channel on the
Level button, but only when just one level is being used.
Original
transmitter
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 429220 Gewa Control Medi Standard at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 429220 Gewa Control Medi Standard in the language / languages: English, Swedish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abilia 429220 Gewa Control Medi Standard

Abilia 429220 Gewa Control Medi Standard User Manual - German, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info