Manual Abilia 429000 - Gewa Control Omni (page 23 of 52) (English)

677185

Zoom out

Zoom in

1/52

Creating Macros

Your Control Omni can send macros which means that it can emit IR-signals, radio signals

and activate a button with recorded sound. Your Control Omni automatically carries out a

sequence of operations after one button is pressed. For example, 4 buttons must be

pressed in order to reach a page on your TV-menu. You can create a macro from these four

button presses. A macro can last for up to 11 seconds. When creating a Macro it is possible

to set the time between each button press. This is made by pressing the same button on

which the Macros can be stored . When creating the Macro the time for each press is also

shown.

Note! The button that is selected for storing the macro is given a temporary image .

Tip! There is also possible to repeat a macro by selecting Repeat Macro. This could be

used when changing the TV channels, for example select one button (P+) and then the

function will be repeated the number of selected repetitions or until next press on the control

switch.

Create an IR macro by using the following procedure:

 Pages/buttons  Select page  Select a page on which the macro is to be

stored  Select this page  Edit button  Select the button on which the macro is to

be stored  Function  Environment  Macro  Start macro recording  Select the

buttons that are to be included in the macro  Save

Adding radio control

In Control Omni it is possible to control different devices with Gewa Radio (GR).

GR unit can be a radio receiver (GR receiver) or a radio transmitter (GR transmitter) from

Abilia or a switch and wall outlet from Schnider (Connect) and Merten (System M).

Before entering GR units the following must be considered:

 Appliances possible to control are switches and wall outlets from Schnider (Connect)

and Merten (System M).

 We recommend you to start by resetting GR units (Delete GR units) before entering

them in Control Omni. If a GR unit has been programmed it cannot be added again

without a reset.

 Control Omni must always be used as the primary transmitter. Start by progamming

Control Omni and then add other GR transmitters. To add other GR transmitters we

recommend you to read the GR manual.

 When a Control Omni has been programmed with GR units a back-up should be made

to save all settings. It is always possible to use the backup-file for another Control

Omni and thus restore the same functions.

 If Control Omni should be switched off or break other GR transmitters, programmed in

the system, will always continue to work. If Control Omni is replaced by another

Control Omni a back-up must be used from a broken unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 429000 - Gewa Control Omni in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abilia 429000 - Gewa Control Omni

Abilia 429000 - Gewa Control Omni Manual - English - 29 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info