Manual Abilia 429000 - Gewa Control Omni (page 21 of 52) (English)

677185

Zoom out

Zoom in

1/52

Managing Buttons

Recording IR codes

If your Control Omni is to be used to control a TV, for example, or a stereo, DVD, toys,

lamps, etc., these devices must have a remote control unit that emits infrared light (IR light).

Most TVs have a remote control unit that is used to control various functions. You will need

the remote control to teach your Control Omni the IR codes.

Before starting to record IR codes, ensure that your Control Omni is fully charged and that

the batteries in the remote control unit are also fully charged. Do not place your Control Omni

and the remote control unit in bright light (such a strong sunlight) during the learning

procedure. When you have learnt how to record IR codes, you can proceed and use the rapid

learning procedure, which is described in chapter Rapid Recording on page 21.

Recording

Turn the remote control towards your Control Omni as shown in fig. 18. Press and hold down

the button of the remote control unit that is to be recorded, and follow the instructions on the

screen. Three presses are normally required to record an IR code. When your Control Omni

has learnt an IR code, you can directly test the function.

Record IR by using the following procedure:

 Pages/buttons  Select page  browse among the pages  Select this page

 Edit button  Select a button  Function  Environment  Send IR  Record IR

Rapid Recording

If many IR codes are to be recorded, a shortcut can be used to speed up the recording

process.

Record codes by using the rapid process by the following procedure:

 Pages/buttons  Select page  browse among the pages  Select this page

 More  Record IR  Select the button that is to be programmed  Follow the

instructions on the screen  Done  Record IR  etc.

Approx 10 cm

Fig 18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 429000 - Gewa Control Omni in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abilia 429000 - Gewa Control Omni

Abilia 429000 - Gewa Control Omni Manual - English - 29 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info