677186

Abilia 425718 - Gewa Control 18 Manual

28
Zoom out
Zoom in
Previous page
1/60
Next page
28
Tip! Control 18 can record codes from most IR transmitters on the market with a few
exceptions. You may have problems with a few or all of the functions for a certain IR
transmitter. In these cases it is possible to try another recording method. Instead, do as
follows in step 2; Press
P
and
1
at the same time but keep them pressed for
approximately 2 seconds until the indication lamp for the Level-button flashes green and
goes out. Control 18 is now in another recording mode. Otherwise use the same recording
procedure as above.
Adding a 4096-code
Control 18 is delivered with a special coded channel (4096) on the Code-button
!
. The
code is selected randomly. This coded channel is normally used for functions that require
strict authorization such as apartment or house doors. The code has 4096 different
combinations and has always the same code irrespective of which level you use. If you
have to program a new coded channel there are three methods of doing so.
Method one: record the code from another transmitter, as described under Recording IR
channels from another Transmitter. By this method it's possible to program a coded channel
on any button independently of level.
Method two: Enter a numerical value between 0 and 4095. The indicated code will always
be associated with the Code-button
!
. It is then possible to move the code from this button
to other buttons (See under Copying a button). Then you can create a new coded channel if
you wish. Do as follows:
1. Press
P
and
!
at the same time. The indicator lamp on the Code-button and the
current level are now lit.
2. Enter a number from 0 to 4095.
3. Finish with
---
.
4. The indication lamp for the Level-button flashes green to show that the operation is
complete. Make a note of the chosen code for future usage.
Adding a 4096 code, method 2
Press
P
+
!
, press the desired code, press
---
.
Default setting: Random code
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 425718 - Gewa Control 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 425718 - Gewa Control 18 in the language / languages: English, Swedish, Norwegian as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abilia 425718 - Gewa Control 18

Abilia 425718 - Gewa Control 18 User Manual - German, French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info