677187

Abilia 425710 - Gewa Control 10 Manual

29
Zoom out
Zoom in
Previous page
1/56
Next page
29
Setting an acceptance delay
Control 10 makes it possible to set an acceptance delay. By acceptance delay is meant the
time a button has to be pressed before a result is reached. The acceptance delay can be
set in 6 steps (
---
,
1
,
2
,
3
,
4
,
!
).
---
= no delay time and
!
= maximum delay time (0.5 second).
Do as follows:
1. Press
P
and
2
at the same time. The indication lamp for the current level are now lit.
2. Press a button,
---
,
1
,
2
,
3
,
4
,
!
to choose delay time.
3. The indication lamp for programming flashes green to show that the operation is
complete.
Setting an acceptance delay
Press
P
+
2
, choose setting.
---
= no delay time and
!
= maximum delay time (0.5 second).
Default setting: Acceptance delay = OFF (0 sec).
Creating an automatic sequence (Macro)
Your Control 10 is able to send sequences of codes. When you press one button, Control
10 automatically carries out what is equivalent to pressing several buttons. One available
application for instance is muting the TV at the same time as you answer the telephone.
Your Control 10 can also be programmed to change levels and it remembers how long a
button should transmit. The transmission of a sequence can be terminated at any time by
pressing another optional button. When a sequence is programmed your Control 10
transmits at the same time what is already on the button. Max. 25 seconds and 48 button
presses per sequence can be programmed.
NOTE! The button used to store the sequence must not be part of the sequence.
1. Press
P
and
!
at the same time. The indication lamp for the current level are now lit.
2. Press
1
.
3. Press the buttons which should be used for the sequence.
4. Choose the level where you want the sequence to be.
5. Press
P
and
!
at the same time. The indication lamp for level B and the current level
are now lit.
6. Press
2
.
7. Choose the button
X
where you want the sequence to be stored.
8. The indication lamp for programming flashes green to indicate that the operation is
complete.
Creating an automatic sequence (Macro)
Press
P
+
!
,
1
, create the sequence, choose level,
P
+
!
,
2
, choose button
X
.
Max 25 seconds per press, 48 presses
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 425710 - Gewa Control 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 425710 - Gewa Control 10 in the language / languages: English, Swedish, Norwegian as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abilia 425710 - Gewa Control 10

Abilia 425710 - Gewa Control 10 User Manual - German, French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info