541311

AAS Ultra Analog VA-2 Manual

58
Zoom out
Zoom in
Previous page
1/66
Next page
58 Audio and MIDI Settings
Depending on your machine you should choose, for a given sampling frequency, the smallest
buffer size that allows you to keep real-time for a reasonable number of voices of polyphony.
6.2 MIDI Configuration
6.2.1 Selecting a MIDI Device
The list of available MIDI inputs appears at the bottom of the Audio Setup dialog. Click on the
Audio Setup button located in the lower left corner of the Ultra Analog VA interface and then click
on the checkbox corresponding to any of the inputs you wish to use.
6.2.2 Creating MIDI Links
Every control on the Ultra Analog VA interface can be manipulated by an external MIDI controller
through MIDI control change assignments. In most cases this is much more convenient than using
the mouse, especially if you want to move many controllers at once. For example, you can map the
motion of a knob on the interface to a real knob on a knob box or to the modulation wheel from
your keyboard. As you use the specified MIDI controllers, the controls move on the Ultra Analog
VA interface just as if you had used the mouse.
In order to assign a MIDI link to a controller:
• On the Ultra Analog VA interface, right-click/Control-click on a control (knob, button) and
select the MIDI Learn command.
• Move a knob or slider on your MIDI controller (this can be a keyboard, a knob box, or any
device that sends MIDI). This links the control of Ultra Analog VA to the MIDI controller
you just moved.
To deactivate a MIDI link, simply righ-click/Control-click on the corresponding control on the
Ultra Analog VA interface and select the MIDI Forget command.
6.2.3 Creating a default MIDI Map
It is possible to define a a set of MIDI links, called a MIDI map, that will be loaded automatically
when Ultra Analog VA is launched. Once you have defined a set of MIDI links that you wish to
save, click on MIDI button to open the MIDI configuration window and click on the Save Current
as Default button.
If you make changes to MIDI links after opening the program and wish to revert to the default
MIDI map click on MIDI button to open the MIDI configuration window and click on the Load
Default button.
If you wish to deactivate all the MIDI links at once open the MIDI configuration window and
click on the Clear MIDI Map button.
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Ultra Analog VA-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Ultra Analog VA-2 in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info